lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] drivers: serial: jsm: Add Classic board UART structure
Date
This commit adds the UART structure for the Digi Classic cards. This
code comes from the staging/dgnc driver.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
---
drivers/tty/serial/jsm/jsm.h | 59 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 58 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index af70134..9861639 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -222,7 +222,10 @@ struct jsm_channel {
u8 ch_mostat; /* FEP output modem status */
u8 ch_mistat; /* FEP input modem status */

- struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */
+ /* Pointers to the "mapped" UART structs */
+ struct neo_uart_struct __iomem *ch_neo_uart; /* NEO card */
+ struct cls_uart_struct __iomem *ch_cls_uart; /* Classic card */
+
u8 ch_cached_lsr; /* Cached value of the LSR register */

u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */
@@ -254,6 +257,60 @@ struct jsm_channel {
u64 ch_xoff_sends; /* Count of xoffs transmitted */
};

+/************************************************************************
+ * Per channel/port Classic UART structures *
+ ************************************************************************
+ * Base Structure Entries Usage Meanings to Host *
+ * *
+ * W = read write R = read only *
+ * U = Unused. *
+ ************************************************************************/
+
+struct cls_uart_struct {
+ u8 txrx; /* WR RHR/THR - Holding Reg */
+ u8 ier; /* WR IER - Interrupt Enable Reg */
+ u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg*/
+ u8 lcr; /* WR LCR - Line Control Reg */
+ u8 mcr; /* WR MCR - Modem Control Reg */
+ u8 lsr; /* WR LSR - Line Status Reg */
+ u8 msr; /* WR MSR - Modem Status Reg */
+ u8 spr; /* WR SPR - Scratch Pad Reg */
+};
+
+/* Where to read the interrupt register (8bits) */
+#define UART_CLASSIC_POLL_ADDR_OFFSET 0x40
+
+#define UART_EXAR654_ENHANCED_REGISTER_SET 0xBF
+
+#define UART_16654_FCR_TXTRIGGER_8 0x0
+#define UART_16654_FCR_TXTRIGGER_16 0x10
+#define UART_16654_FCR_TXTRIGGER_32 0x20
+#define UART_16654_FCR_TXTRIGGER_56 0x30
+
+#define UART_16654_FCR_RXTRIGGER_8 0x0
+#define UART_16654_FCR_RXTRIGGER_16 0x40
+#define UART_16654_FCR_RXTRIGGER_56 0x80
+#define UART_16654_FCR_RXTRIGGER_60 0xC0
+
+#define UART_IIR_CTSRTS 0x20 /* Received CTS/RTS change of state */
+#define UART_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */
+
+/*
+ * These are the EXTENDED definitions for the Exar 654's Interrupt
+ * Enable Register.
+ */
+#define UART_EXAR654_EFR_ECB 0x10 /* Enhanced control bit */
+#define UART_EXAR654_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */
+#define UART_EXAR654_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */
+#define UART_EXAR654_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */
+#define UART_EXAR654_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */
+
+#define UART_EXAR654_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */
+#define UART_EXAR654_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */
+
+#define UART_EXAR654_IER_XOFF 0x20 /* Xoff Interrupt Enable */
+#define UART_EXAR654_IER_RTSDTR 0x40 /* Output Interrupt Enable */
+#define UART_EXAR654_IER_CTSDSR 0x80 /* Input Interrupt Enable */

/************************************************************************
* Per channel/port NEO UART structure *
--
1.9.1


\
 
 \ /
  Last update: 2014-11-03 20:21    [W:0.119 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site