lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 02/58] serial: at91: Use dmaengine_slave_config API
On 28/10/2014 22:25, Maxime Ripard :
> We are removing the dmaengine_device_control API, that shouldn't even have been
> exposed in the first place. Change the callers to use the proper API.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Thanks, Maxime. Do I have to carry the patch myself or is it part of a
series?

Bye,

> ---
> drivers/tty/serial/atmel_serial.c | 10 ++++------
> 1 file changed, 4 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index edde3eca055d..10e6b382d68f 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -862,9 +862,8 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
> config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> config.dst_addr = port->mapbase + ATMEL_US_THR;
>
> - ret = dmaengine_device_control(atmel_port->chan_tx,
> - DMA_SLAVE_CONFIG,
> - (unsigned long)&config);
> + ret = dmaengine_slave_config(atmel_port->chan_tx,
> + &config);
> if (ret) {
> dev_err(port->dev, "DMA tx slave configuration failed\n");
> goto chan_err;
> @@ -1026,9 +1025,8 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
> config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> config.src_addr = port->mapbase + ATMEL_US_RHR;
>
> - ret = dmaengine_device_control(atmel_port->chan_rx,
> - DMA_SLAVE_CONFIG,
> - (unsigned long)&config);
> + ret = dmaengine_slave_config(atmel_port->chan_rx,
> + &config);
> if (ret) {
> dev_err(port->dev, "DMA rx slave configuration failed\n");
> goto chan_err;
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2014-11-03 12:41    [W:0.473 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site