[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v8 00/10] sched: consolidation of CPU capacity and usage
On 3 November 2014 03:12, Wanpeng Li <> wrote:
> Hi Vincent,
> On 14/10/31 下午4:47, Vincent Guittot wrote:
>> This patchset consolidates several changes in the capacity and the usage
>> tracking of the CPU. It provides a frequency invariant metric of the usage
>> of
>> CPUs and generally improves the accuracy of load/usage tracking in the
>> scheduler. The frequency invariant metric is the foundation required for
>> the
>> consolidation of cpufreq and implementation of a fully invariant load
>> tracking.
>> These are currently WIP and require several changes to the load balancer
>> (including how it will use and interprets load and capacity metrics) and
>> extensive validation. The frequency invariance is done with
>> arch_scale_freq_capacity and this patchset doesn't provide the backends of
>> the function which are architecture dependent.
>> As discussed at LPC14, Morten and I have consolidated our changes into a
>> single
>> patchset to make it easier to review and merge.
>> During load balance, the scheduler evaluates the number of tasks that a
>> group
>> of CPUs can handle. The current method assumes that tasks have a fix load
>> of
>> SCHED_LOAD_SCALE and CPUs have a default capacity of SCHED_CAPACITY_SCALE.
>> This assumption generates wrong decision by creating ghost cores or by
> I don't know the history, could you explain what's the meaning of 'ghost
> cores' ?

The capacity_factor gives the number of tasks that can be handled by a
group of CPUs by dividing the group's capacity by SCHED_CAPACITY_SCALE

For a system with SMT, the default capacity of a core is 1178 so the
capacity of each CPU for a dual threads per core is 589.

At CPU level we have a capacity_factor of 1 = div_round_closest(589, 1024)
At core level we still have a capacity_factor of 1 =
div_round_closest(1178, 1024). This is a intended behavior to promote
1 task per core
Then, if we have 4 cores in a node, the capacity_factor is 5 =
div_round_closest(4712, 1024) whereas we should have 4. So a 5th ghost
core has appeared in the group and the load balancer will not
considered the group as overloaded if there is 5 tasks whereas it
should in order to try to move this 5th task on an idle core (if there
is one)
Patch [0] solves some use cases by ensuring that we will not have more
cores than possible so we can't have more than 4 core for the previous
Now, if some RT tasks are running and using almost 1 core (1024 as an
example), the capacity_factor is still 4 = div_round_closest(3688,
1024) whereas a core is nearly fully used and the capacity_factor
should be 3



> Regards,
> Wanpeng Li
>> removing real ones when the original capacity of CPUs is different from
>> the
>> default SCHED_CAPACITY_SCALE. With this patch set, we don't try anymore to
>> evaluate the number of available cores based on the group_capacity but
>> instead
>> we evaluate the usage of a group and compare it with its capacity.
>> This patchset mainly replaces the old capacity_factor method by a new one
>> and
>> keeps the general policy almost unchanged. These new metrics will be also
>> used
>> in later patches.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2014-11-03 12:01    [W:0.175 / U:7.364 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site