lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
On Wed, Oct 29, 2014 at 04:47:03PM +0300, Dmitry Lavnikevich wrote:
> Audio on phyFLEX boards is presented by tlv320aic3007 codec connected
> over SSI interface.
>
> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
> ---
> arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 100 ++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 15 ++++
> 2 files changed, 113 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
> index f1bdcae5b97d..cb8f1b6ec083 100644
> --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
> @@ -9,10 +9,73 @@
> * http://www.gnu.org/copyleft/gpl.html
> */
>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +
> / {
> chosen {
> linux,stdout-path = &uart4;
> };
> +
> + regulators {
> + sound_1v8: regulator@2 {
> + compatible = "regulator-fixed";
> + reg = <2>;
> + regulator-name = "i2s-audio-1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + sound_3v3: regulator@3 {
> + compatible = "regulator-fixed";
> + reg = <3>;
> + regulator-name = "i2s-audio-3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> +
> + tlv320_mclk: oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <19200000>;
> + clock-output-names = "tlv320-mclk";
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "OnboardTLV320AIC3007";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&dailink_master>;
> + simple-audio-card,frame-master = <&dailink_master>;
> + simple-audio-card,widgets =
> + "Microphone", "Mic Jack",
> + "Line", "Line In",
> + "Line", "Line Out",
> + "Speaker", "Speaker",
> + "Headphone", "Headphone Jack";
> + simple-audio-card,routing =
> + "Line Out", "LLOUT",
> + "Line Out", "RLOUT",
> + "Speaker", "SPOP",
> + "Speaker", "SPOM",
> + "Headphone Jack", "HPLOUT",
> + "Headphone Jack", "HPROUT",
> + "MIC3L", "Mic Jack",
> + "MIC3R", "Mic Jack",
> + "Mic Jack", "Mic Bias",
> + "LINE1L", "Line In",
> + "LINE1R", "Line In";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&ssi2>;
> + };
> +
> + dailink_master: simple-audio-card,codec {
> + sound-dai = <&codec>;
> + clocks = <&tlv320_mclk>;
> + };
> + };
> +
> };
>
> &fec {
> @@ -27,12 +90,45 @@
> status = "okay";
> };
>
> +&ssi2 {
> + status = "okay";
> +};
> +
> +&audmux {

Please sort the nodes alphabetically in label name.

> + status = "okay";
> +
> + ssi2 {
> + fsl,audmux-port = <1>;
> + fsl,port-config = <
> + (IMX_AUDMUX_V2_PTCR_TFSDIR |
> + IMX_AUDMUX_V2_PTCR_TFSEL(4) |
> + IMX_AUDMUX_V2_PTCR_TCLKDIR |
> + IMX_AUDMUX_V2_PTCR_TCSEL(4))
> + IMX_AUDMUX_V2_PDCR_RXDSEL(4)
> + >;
> + };
> + pins5 {

Have a new line between nodes.

> + fsl,audmux-port = <4>;
> + fsl,port-config = <
> + 0x00000000
> + IMX_AUDMUX_V2_PDCR_RXDSEL(1)
> + >;
> + };
> +};
> +
> &i2c2 {
> status = "okay";
>
> - tlv320@18 {
> - compatible = "ti,tlv320aic3x";
> + codec: tlv320@18 {
> + compatible = "ti,tlv320aic3007";

Both compatible strings are documented in
Documentation/devicetree/bindings/sound/tlv320aic3x.txt. But I hope
this change will not cause any DT compatible issues.

> + #sound-dai-cells = <0>;
> reg = <0x18>;
> + ai3x-micbias-vg = <2>;
> +
> + AVDD-supply = <&sound_3v3>;
> + IOVDD-supply = <&sound_3v3>;
> + DRVDD-supply = <&sound_3v3>;
> + DVDD-supply = <&sound_1v8>;
> };
>
> stmpe@41 {
> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> index aa2275671d2c..d7f34664e008 100644
> --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> @@ -58,6 +58,12 @@
> };
> };
>
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> + status = "disabled";
> +};
> +
> &ecspi3 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_ecspi3>;
> @@ -319,6 +325,15 @@
> MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
> >;
> };
> +
> + pinctrl_audmux: audmuxgrp {

Please sort the pinctrl entries alphabetically.

Shawn

> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0
> + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0
> + MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0
> + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
> + >;
> + };
> };
> };
>
> --
> 2.1.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2014-11-03 07:41    [W:0.657 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site