lkml.org 
[lkml]   [2014]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/25] Documentation: bindings: add doc for the Berlin USB PHY
Date
From: Antoine Tenart <antoine.tenart@free-electrons.com>

Document the bindings of the Marvell Berlin USB PHY driver.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/berlin-usb-phy.txt | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
new file mode 100644
index 0000000..be33780
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
@@ -0,0 +1,16 @@
+* Marvell Berlin USB PHY
+
+Required properties:
+- compatible: "marvell,berlin2-usb-phy" or "marvell,berlin2cd-usb-phy"
+- reg: base address and length of the registers
+- #phys-cells: should be 0
+- resets: reference to the reset controller
+
+Example:
+
+ usb-phy@f774000 {
+ compatible = "marvell,berlin2-usb-phy";
+ reg = <0xf774000 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 0x104 14>;
+ };
--
1.7.9.5


\
 
 \ /
  Last update: 2014-11-27 08:02    [W:0.111 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site