lkml.org 
[lkml]   [2014]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 3/5] arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and Makefile
On Tue, Nov 25, 2014 at 12:16:56PM +0000, Chunyan Zhang wrote:
> From: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com>
>
> Adds the device tree support for Spreadtrum SC9836 SoC which is based on
> Sharkl64 platform.
>
> Sharkl64 platform contains the common nodes of Spreadtrum's arm64-based SoCs.
>
> Signed-off-by: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
> ---
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/sprd-sc9836-openphone.dts | 85 ++++++++++++++++++++
> arch/arm64/boot/dts/sprd-sc9836.dtsi | 103 ++++++++++++++++++++++++
> arch/arm64/boot/dts/sprd-sharkl64.dtsi | 105 +++++++++++++++++++++++++
> 4 files changed, 294 insertions(+)
> create mode 100644 arch/arm64/boot/dts/sprd-sc9836-openphone.dts
> create mode 100644 arch/arm64/boot/dts/sprd-sc9836.dtsi
> create mode 100644 arch/arm64/boot/dts/sprd-sharkl64.dtsi
>
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index f8001a6..d0aff8a 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -1,4 +1,5 @@
> dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
> +dtb-$(CONFIG_ARCH_SHARKL64) += sprd-sc9836-openphone.dtb
> dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
> dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb

[...]

> + gic: interrupt-controller@12001000 {
> + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0 0x12001000 0 0x1000>,
> + <0 0x12002000 0 0x1000>,
> + <0 0x12004000 0 0x2000>,
> + <0 0x12006000 0 0x2000>;
> + };

I believe GICC should be 8KiB here.

> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
Do you have a complete PSCI 0.2 implementation (e.g. are all the
mandatory functions implemented)?

I take it CPUs enter the kernel at EL2?

How have you tested this?

> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 13 0xff01>,
> + <1 14 0xff01>,
> + <1 11 0xff01>,
> + <1 10 0xff01>;
> + clock-frequency = <26000000>;

Please remove the clock-frequency property. Your FW should initialise
CNTFRQ_EL0 on all CPUs (certainly PSCI 0.2 requires that you do this).

[...]

> + clocks {
> + clk26mhz: clk26mhz {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + };
> + };

Get rid of the "clocks" container node. There's no need for it.

Thanks,
Mark.


\
 
 \ /
  Last update: 2014-11-27 13:21    [W:0.202 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site