lkml.org 
[lkml]   [2014]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4/4] ARM: sti: Provide DT nodes for SBC SSC[0..2]
    Date
    The Synchronous Serial Controller is used to provide SPI.

    These are the ports which are located on the Stand-By Controller (SBC).

    Signed-off-by: Lee Jones <lee.jones@linaro.org>
    ---
    arch/arm/boot/dts/stih407.dtsi | 31 +++++++++++++++++++++++++++++++
    1 file changed, 31 insertions(+)

    diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
    index 245aa31..cff106d 100644
    --- a/arch/arm/boot/dts/stih407.dtsi
    +++ b/arch/arm/boot/dts/stih407.dtsi
    @@ -329,5 +329,36 @@

    status = "disabled";
    };
    +
    + /* SBC SSC */
    + spi@9540000 {
    + compatible = "st,comms-ssc-spi";
    + reg = <0x9540000 0x110>;
    + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
    + clocks = <&clk_sysin>;
    + clock-names = "ssc";
    +
    + status = "disabled";
    + };
    +
    + spi@9541000 {
    + compatible = "st,comms-ssc-spi";
    + reg = <0x9541000 0x110>;
    + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
    + clocks = <&clk_sysin>;
    + clock-names = "ssc";
    +
    + status = "disabled";
    + };
    +
    + spi@9542000 {
    + compatible = "st,comms-ssc-spi";
    + reg = <0x9542000 0x110>;
    + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
    + clocks = <&clk_sysin>;
    + clock-names = "ssc";
    +
    + status = "disabled";
    + };
    };
    };
    --
    1.9.1


    \
     
     \ /
      Last update: 2014-11-27 13:21    [W:2.370 / U:0.068 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site