lkml.org 
[lkml]   [2014]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] staging: comedi: adl_pci9118: simplify interrupt_pci9118_ai_dma() a bit
Date
Eliminate the `next_dma_buf` variable in `interrupt_pci9118_ai_dma()`.
It holds the next value of `devpriv->dma_actbuf` when double buffering
is used, but we can just set that to the next value directly at the
point where the buffers are switched as the old value is not used
anywhere else.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/adl_pci9118.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 5e0ff9d..aecfae8 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -608,16 +608,15 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
struct comedi_cmd *cmd = &s->async->cmd;
struct pci9118_dmabuf *dmabuf = &devpriv->dmabuf[devpriv->dma_actbuf];
unsigned int nsamples = comedi_bytes_to_samples(s, dmabuf->use_size);
- unsigned int next_dma_buf;

- if (devpriv->dma_doublebuf) { /*
- * switch DMA buffers if is used
- * double buffering
- */
- next_dma_buf = 1 - devpriv->dma_actbuf;
- pci9118_amcc_setup_dma(dev, next_dma_buf);
- if (devpriv->ai_do == 4)
- interrupt_pci9118_ai_mode4_switch(dev, next_dma_buf);
+ /* switch DMA buffers and restart DMA if double buffering */
+ if (devpriv->dma_doublebuf) {
+ devpriv->dma_actbuf = 1 - devpriv->dma_actbuf;
+ pci9118_amcc_setup_dma(dev, devpriv->dma_actbuf);
+ if (devpriv->ai_do == 4) {
+ interrupt_pci9118_ai_mode4_switch(dev,
+ devpriv->dma_actbuf);
+ }
}

if (nsamples) {
@@ -631,11 +630,8 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
s->async->events |= COMEDI_CB_EOA;
}

- if (devpriv->dma_doublebuf) {
- /* switch dma buffers */
- devpriv->dma_actbuf = 1 - devpriv->dma_actbuf;
- } else {
- /* restart DMA if is not used double buffering */
+ /* restart DMA if not double buffering */
+ if (!devpriv->dma_doublebuf) {
pci9118_amcc_setup_dma(dev, 0);
if (devpriv->ai_do == 4)
interrupt_pci9118_ai_mode4_switch(dev, 0);
--
2.1.3


\
 
 \ /
  Last update: 2014-11-27 13:21    [W:0.060 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site