lkml.org 
[lkml]   [2014]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] drm/msm/hdmi: don't call clk_round_rate to check hdmi pclk for MDP5
Date
clock driver can support dynamic rate settings for HDMI
pixelclock, so don't need to use clk_round_rate to check if the
clockrate for specific mode is supported therefore more display
modes can be supported.

Change-Id: I308df4eb604438c24df463619571d8e18cc956b6
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 9 ---------
1 file changed, 9 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index c458348..cf18896 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -355,8 +355,6 @@ static int hdmi_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
- struct hdmi *hdmi = hdmi_connector->hdmi;
- const struct hdmi_platform_config *config = hdmi->config;
struct msm_drm_private *priv = connector->dev->dev_private;
struct msm_kms *kms = priv->kms;
long actual, requested;
@@ -365,13 +363,6 @@ static int hdmi_connector_mode_valid(struct drm_connector *connector,
actual = kms->funcs->round_pixclk(kms,
requested, hdmi_connector->hdmi->encoder);

- /* for mdp5/apq8074, we manage our own pixel clk (as opposed to
- * mdp4/dtv stuff where pixel clk is assigned to mdp/encoder
- * instead):
- */
- if (config->pwr_clk_cnt > 0)
- actual = clk_round_rate(hdmi->pwr_clks[0], actual);
-
DBG("requested=%ld, actual=%ld", requested, actual);

if (actual != requested)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


\
 
 \ /
  Last update: 2014-11-26 21:41    [W:0.029 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site