lkml.org 
[lkml]   [2014]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] hwmon: ina2xx: make shunt resistance configurable at run-time
On 11/25/2014 07:47 AM, Bartosz Golaszewski wrote:
> The shunt resistance can only be set via platform_data or device tree. This
> isn't suitable for devices in which the shunt resistance can change/isn't
> known at boot-time.
>
For a given system it should always be known, and it appears unlikely
that there is a system out there where the shunt resistor value can change.

What system exactly are you talking about ?

Thanks,
Guenter

> Add a sysfs attribute that allows to read and set the shunt resistance.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> drivers/hwmon/ina2xx.c | 58 ++++++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 51 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
> index 660f8ca..eb66081 100644
> --- a/drivers/hwmon/ina2xx.c
> +++ b/drivers/hwmon/ina2xx.c
> @@ -51,6 +51,8 @@
> #define INA226_ALERT_LIMIT 0x07
> #define INA226_DIE_ID 0xFF
>
> +/* shunt resistor sysfs attribute index */
> +#define INA2XX_RSHUNT 0x8
>
> /* register count */
> #define INA219_REGISTERS 6
> @@ -65,6 +67,9 @@
> /* worst case is 68.10 ms (~14.6Hz, ina219) */
> #define INA2XX_CONVERSION_RATE 15
>
> +/* default shunt resistance */
> +#define INA2XX_RSHUNT_DEFAULT 10000
> +
> enum ina2xx_ids { ina219, ina226 };
>
> struct ina2xx_config {
> @@ -87,6 +92,8 @@ struct ina2xx_data {
>
> int kind;
> u16 regs[INA2XX_MAX_REGISTERS];
> +
> + long rshunt;
> };
>
> static const struct ina2xx_config ina2xx_config[] = {
> @@ -110,6 +117,11 @@ static const struct ina2xx_config ina2xx_config[] = {
> },
> };
>
> +static u16 ina2xx_calibration_val(const struct ina2xx_data *data)
> +{
> + return (u16)(data->config->calibration_factor / data->rshunt);
> +}
> +
> static int ina2xx_write_register(const struct i2c_client *client,
> u8 reg, u16 value)
> {
> @@ -198,6 +210,9 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg)
> /* signed register, LSB=1mA (selected), in mA */
> val = (s16)data->regs[reg];
> break;
> + case INA2XX_RSHUNT:
> + val = data->rshunt;
> + break;
> default:
> /* programmer goofed */
> WARN_ON_ONCE(1);
> @@ -221,6 +236,30 @@ static ssize_t ina2xx_show_value(struct device *dev,
> ina2xx_get_value(data, attr->index));
> }
>
> +static ssize_t ina2xx_set_shunt(struct device *dev,
> + struct device_attribute *da,
> + const char *buf, size_t count)
> +{
> + struct ina2xx_data *data = ina2xx_update_device(dev);
> + long val;
> + s32 status;
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + if ((kstrtol(buf, 10, &val) == -EINVAL) || (val <= 0))
> + return -EINVAL;
> +
> + mutex_lock(&data->update_lock);
> + data->rshunt = val;
> + status = ina2xx_calibrate(data->client, ina2xx_calibration_val(data));
> + mutex_unlock(&data->update_lock);
> + if (status < 0)
> + return -ENODEV;
> +
> + return count;
> +}
> +
> /* shunt voltage */
> static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina2xx_show_value, NULL,
> INA2XX_SHUNT_VOLTAGE);
> @@ -237,12 +276,17 @@ static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina2xx_show_value, NULL,
> static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
> INA2XX_POWER);
>
> +/* shunt resistance */
> +static SENSOR_DEVICE_ATTR(rshunt, S_IRUGO | S_IWUSR | S_IWGRP,
> + ina2xx_show_value, ina2xx_set_shunt, INA2XX_RSHUNT);
> +
> /* pointers to created device attributes */
> static struct attribute *ina2xx_attrs[] = {
> &sensor_dev_attr_in0_input.dev_attr.attr,
> &sensor_dev_attr_in1_input.dev_attr.attr,
> &sensor_dev_attr_curr1_input.dev_attr.attr,
> &sensor_dev_attr_power1_input.dev_attr.attr,
> + &sensor_dev_attr_rshunt.dev_attr.attr,
> NULL,
> };
> ATTRIBUTE_GROUPS(ina2xx);
> @@ -255,7 +299,6 @@ static int ina2xx_probe(struct i2c_client *client,
> struct device *dev = &client->dev;
> struct ina2xx_data *data;
> struct device *hwmon_dev;
> - long shunt = 10000; /* default shunt value 10mOhms */
> u32 val;
>
> if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
> @@ -267,13 +310,15 @@ static int ina2xx_probe(struct i2c_client *client,
>
> if (dev_get_platdata(dev)) {
> pdata = dev_get_platdata(dev);
> - shunt = pdata->shunt_uohms;
> + data->rshunt = pdata->shunt_uohms;
> } else if (!of_property_read_u32(dev->of_node,
> "shunt-resistor", &val)) {
> - shunt = val;
> + data->rshunt = val;
> + } else {
> + data->rshunt = INA2XX_RSHUNT_DEFAULT;
> }
>
> - if (shunt <= 0)
> + if (data->rshunt <= 0)
> return -ENODEV;
>
> /* set the device type */
> @@ -287,8 +332,7 @@ static int ina2xx_probe(struct i2c_client *client,
> /* Set current LSB to 1mA, shunt is in uOhms
> * (equation 13 in datasheet).
> */
> - if (ina2xx_calibrate(client,
> - data->config->calibration_factor / shunt) < 0)
> + if (ina2xx_calibrate(client, ina2xx_calibration_val(data)) < 0)
> return -ENODEV;
>
> data->client = client;
> @@ -300,7 +344,7 @@ static int ina2xx_probe(struct i2c_client *client,
> return PTR_ERR(hwmon_dev);
>
> dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n",
> - id->name, shunt);
> + id->name, data->rshunt);
>
> return 0;
> }
>



\
 
 \ /
  Last update: 2014-11-25 17:41    [W:2.627 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site