lkml.org 
[lkml]   [2014]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] hwmon: ina2xx: documentation update for new sysfs attributes
Date
Include the rshunt and avg sysfs attributes for ina2xx in the documentation.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
Documentation/hwmon/ina2xx | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index 4223c2d..621cf98 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -44,6 +44,10 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage.
The INA230 is a high or low side current shunt and power monitor with an I2C
interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.

-The shunt value in micro-ohms can be set via platform data or device tree.
-Please refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
-if the device tree is used.
+The shunt value in micro-ohms can be set via platform data or device tree in
+compile-time or via the rshunt attribute in sysfs in run-time. Please refer to
+the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings if the
+device tree is used.
+
+The averaging rate of INA226 and INA230 can be changed via the avg sysfs
+attribute. The available rates are: 1, 4, 16, 64, 128, 256, 512 and 1024.
--
2.1.3


\
 
 \ /
  Last update: 2014-11-25 17:21    [W:0.091 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site