lkml.org 
[lkml]   [2014]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] clk: Add PWM clock driver
Date
Quoting Philipp Zabel (2014-11-03 01:31:18)
> Some board designers, when running out of clock output pads, decide to
> (mis)use PWM output pads to provide a clock to external components.
> This driver supports this practice by providing an adapter between the
> PWM and clock bindings in the device tree. As the PWM bindings specify
> the period in the device tree, this is a fixed clock.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> I'm resending this because last time the linux-pwm list was not in Cc:
> So far I have not received any comments on the patch itself. I have used
> it on a BoundaryDevices Nitrogen6X board to produce a master clock for
> the OV5640 MIPI CSI-2 camera module.
>
> Changes since v1:
> - none (rebased onto v3.18-rc3)

Hi Philipp,

Thanks for testing this. Is the Nitrogen6X board merged upstream? I'm OK
with the patch but prefer to merge things when a consumer is ready to
use it. I guess you are missing a patch to add the pwm-clock bits to the
Nitrogen6X dts?

Regards,
Mike

> ---
> .../devicetree/bindings/clock/pwm-clock.txt | 23 +++++
> drivers/clk/Kconfig | 7 ++
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-pwm.c | 110 +++++++++++++++++++++
> 4 files changed, 141 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/pwm-clock.txt
> create mode 100644 drivers/clk/clk-pwm.c
>
> diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt
> new file mode 100644
> index 0000000..d127d17
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/pwm-clock.txt
> @@ -0,0 +1,23 @@
> +Binding for an external clock signal driven by a PWM pin.
> +
> +This binding uses the common clock binding[1] and the common PWM binding[2].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/pwm/pwm.txt
> +
> +Required properties:
> +- compatible : shall be "pwm-clock".
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- pwms : from common PWM binding; this determines the clock frequency
> + via the PWM period given in the pwm-specifier.
> +
> +Optional properties:
> +- clock-output-names : From common clock binding.
> +
> +Example:
> + clock {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-output-names = "mipi_mclk";
> + pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
> + };
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 455fd17..36a6918a 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -129,6 +129,13 @@ config COMMON_CLK_PALMAS
> This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
> using common clock framework.
>
> +config COMMON_CLK_PWM
> + bool "Clock driver for PWMs used as clock outputs"
> + depends on PWM
> + ---help---
> + Adapter driver so that any PWM output can be (mis)used as clock signal
> + at 50% duty cycle.
> +
> config COMMON_CLK_PXA
> def_bool COMMON_CLK && ARCH_PXA
> ---help---
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index d5fba5b..6a0c5cf 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -40,6 +40,7 @@ obj-$(CONFIG_ARCH_U300) += clk-u300.o
> obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
> obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
> +obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
> obj-$(CONFIG_COMMON_CLK_AT91) += at91/
> obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/
> obj-$(CONFIG_ARCH_BERLIN) += berlin/
> diff --git a/drivers/clk/clk-pwm.c b/drivers/clk/clk-pwm.c
> new file mode 100644
> index 0000000..8f747b3
> --- /dev/null
> +++ b/drivers/clk/clk-pwm.c
> @@ -0,0 +1,110 @@
> +/*
> + * Copyright (C) 2014 Philipp Zabel, Pengutronix
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * PWM (mis)used as clock output
> + */
> +#include <linux/clk-provider.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +
> +struct clk_pwm {
> + struct clk_hw hw;
> + struct pwm_device *pwm;
> +};
> +
> +#define to_clk_pwm(_hw) container_of(_hw, struct clk_pwm, hw)
> +
> +static int clk_pwm_enable(struct clk_hw *hw)
> +{
> + struct clk_pwm *clk_pwm = to_clk_pwm(hw);
> +
> + return pwm_enable(clk_pwm->pwm);
> +}
> +
> +static void clk_pwm_disable(struct clk_hw *hw)
> +{
> + struct clk_pwm *clk_pwm = to_clk_pwm(hw);
> +
> + pwm_disable(clk_pwm->pwm);
> +}
> +
> +static unsigned long clk_pwm_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct clk_pwm *clk_pwm = to_clk_pwm(hw);
> + unsigned int period_ns = pwm_get_period(clk_pwm->pwm);
> +
> + return period_ns ? (1000000000 / period_ns) : 0;
> +}
> +
> +const struct clk_ops clk_pwm_ops = {
> + .enable = clk_pwm_enable,
> + .disable = clk_pwm_disable,
> + .recalc_rate = clk_pwm_recalc_rate,
> +};
> +
> +int clk_pwm_probe(struct platform_device *pdev)
> +{
> + struct clk_init_data init;
> + struct clk_pwm *clk_pwm;
> + struct pwm_device *pwm;
> + struct clk *clk;
> + int ret;
> +
> + clk_pwm = devm_kzalloc(&pdev->dev, sizeof(*clk_pwm), GFP_KERNEL);
> + if (!clk_pwm)
> + return -ENOMEM;
> +
> + pwm = devm_pwm_get(&pdev->dev, NULL);
> + if (IS_ERR(pwm))
> + return PTR_ERR(pwm);
> +
> + ret = pwm_config(pwm, (pwm->period + 1) >> 1, pwm->period);
> + if (ret < 0)
> + return ret;
> +
> + init.name = "pwm-clock";
> + init.ops = &clk_pwm_ops;
> + init.flags = CLK_IS_ROOT;
> + init.num_parents = 0;
> +
> + clk_pwm->pwm = pwm;
> + clk_pwm->hw.init = &init;
> + clk = devm_clk_register(&pdev->dev, &clk_pwm->hw);
> + if (IS_ERR(clk))
> + return PTR_ERR(clk);
> +
> + return of_clk_add_provider(pdev->dev.of_node,
> + of_clk_src_simple_get, clk);
> +}
> +
> +int clk_pwm_remove(struct platform_device *pdev)
> +{
> + of_clk_del_provider(pdev->dev.of_node);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id clk_pwm_dt_ids[] = {
> + { .compatible = "pwm-clock" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, clk_pwm_dt_ids);
> +
> +static struct platform_driver clk_pwm_driver = {
> + .probe = clk_pwm_probe,
> + .driver = {
> + .name = "pwm-clock",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(clk_pwm_dt_ids),
> + },
> +};
> +
> +module_platform_driver(clk_pwm_driver);
> --
> 2.1.1
>


\
 
 \ /
  Last update: 2014-11-25 08:41    [W:0.463 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site