lkml.org 
[lkml]   [2014]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.16.y-ckt 151/254] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
Date
3.16.7-ckt2 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Simon Horman <horms+renesas@verge.net.au>

commit aa1cf25887099bba68f1f3879c0d394e08b8779f upstream.

Unlike other SATA R-Car r8a7790 controllers the r8a7790 ES1 SATA R-Car
controller needs to be run with DIPM disabled.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
Documentation/devicetree/bindings/ata/sata_rcar.txt | 3 ++-
drivers/ata/sata_rcar.c | 10 ++++++++++
2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
index 1e6111333fa8..7dd32d321a34 100644
--- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
+++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
@@ -3,7 +3,8 @@
Required properties:
- compatible : should contain one of the following:
- "renesas,sata-r8a7779" for R-Car H1
- - "renesas,sata-r8a7790" for R-Car H2
+ - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
+ - "renesas,sata-r8a7790" for R-Car H2 other than ES1
- "renesas,sata-r8a7791" for R-Car M2
- reg : address and length of the SATA registers;
- interrupts : must consist of one interrupt specifier.
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 61eb6d77dac7..8732e42db3a9 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -146,6 +146,7 @@
enum sata_rcar_type {
RCAR_GEN1_SATA,
RCAR_GEN2_SATA,
+ RCAR_R8A7790_ES1_SATA,
};

struct sata_rcar_priv {
@@ -763,6 +764,9 @@ static void sata_rcar_setup_port(struct ata_host *host)
ap->udma_mask = ATA_UDMA6;
ap->flags |= ATA_FLAG_SATA;

+ if (priv->type == RCAR_R8A7790_ES1_SATA)
+ ap->flags |= ATA_FLAG_NO_DIPM;
+
ioaddr->cmd_addr = base + SDATA_REG;
ioaddr->ctl_addr = base + SSDEVCON_REG;
ioaddr->scr_addr = base + SCRSSTS_REG;
@@ -792,6 +796,7 @@ static void sata_rcar_init_controller(struct ata_host *host)
sata_rcar_gen1_phy_init(priv);
break;
case RCAR_GEN2_SATA:
+ case RCAR_R8A7790_ES1_SATA:
sata_rcar_gen2_phy_init(priv);
break;
default:
@@ -838,6 +843,10 @@ static struct of_device_id sata_rcar_match[] = {
.data = (void *)RCAR_GEN2_SATA
},
{
+ .compatible = "renesas,sata-r8a7790-es1",
+ .data = (void *)RCAR_R8A7790_ES1_SATA
+ },
+ {
.compatible = "renesas,sata-r8a7791",
.data = (void *)RCAR_GEN2_SATA
},
@@ -849,6 +858,7 @@ static const struct platform_device_id sata_rcar_id_table[] = {
{ "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */
{ "sata-r8a7779", RCAR_GEN1_SATA },
{ "sata-r8a7790", RCAR_GEN2_SATA },
+ { "sata-r8a7790-es1", RCAR_R8A7790_ES1_SATA },
{ "sata-r8a7791", RCAR_GEN2_SATA },
{ },
};
--
2.1.0


\
 
 \ /
  Last update: 2014-11-25 12:42    [W:0.871 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site