lkml.org 
[lkml]   [2014]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH] regulator: core: do not disable regulator if boot_on is set
Date
Currently the regulator core disables the regulators which are unused
or whose reference count is zero or if they are configured always_on.
This change adds a check in this logic to see if a regulator is
configured as boot_on and does not disable it if found true.

Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>

---

The issue was found on apq8064 based IFC6410 on which a fixed regulator
configured as regulator-boot-on in DT and was being disabled when not in
use. Tested this change on this board and found working.

drivers/regulator/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index cd87c0c..9f7a13f 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4019,7 +4019,7 @@ static int __init regulator_init_complete(void)
ops = rdev->desc->ops;
c = rdev->constraints;

- if (c && c->always_on)
+ if (c && (c->always_on || c->boot_on))
continue;

if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
--
1.7.9.5


\
 
 \ /
  Last update: 2014-11-25 12:21    [W:0.056 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site