lkml.org 
[lkml]   [2014]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V5] arm64: amd-seattle: Adding device tree for AMD Seattle platform
Date
From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>

Initial revision of device tree for AMD Seattle Development platform.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Thomas Lendacky <Thomas.Lendacky@amd.com>
Signed-off-by: Joel Schopp <Joel.Schopp@amd.com>
---
V5 Changes:
* Rebase to arm-soc for-next (per Olof)
* Restructure the DTS/DTSI into board and SoC configurations (per Olof)
* Add model property at the top level (per Olof)
* Move pcie0 under smb and change smb's ranges property to empty since pcie
is not in the same range. (per Olof)
* Change v2m0's ranges property (per Arnd)
* Change timer interrupt type to level-trigger (per Marc)

arch/arm64/Kconfig | 5 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/amd/Makefile | 5 +
arch/arm64/boot/dts/amd/amd-overdrive.dts | 66 ++++++++++
arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi | 54 ++++++++
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 172 ++++++++++++++++++++++++++
6 files changed, 303 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 9532f8d..ddc0196 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -142,6 +142,11 @@ source "kernel/Kconfig.freezer"

menu "Platform selection"

+config ARCH_SEATTLE
+ bool "AMD Seattle SoC Family"
+ help
+ This enables support for AMD Seattle SOC Family
+
config ARCH_THUNDER
bool "Cavium Inc. Thunder SoC Family"
help
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index e8efc8f..3b8d427 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,3 +1,4 @@
+dts-dirs += amd
dts-dirs += apm
dts-dirs += arm
dts-dirs += cavium
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
new file mode 100644
index 0000000..cfdf701
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive.dts b/arch/arm64/boot/dts/amd/amd-overdrive.dts
new file mode 100644
index 0000000..564a3f7
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive.dts
@@ -0,0 +1,66 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ linux,pci-probe-only;
+ };
+};
+
+&ccp0 {
+ status = "ok";
+};
+
+&gpio0 {
+ status = "ok";
+};
+
+&gpio1 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ gpios = <&gpio0 7 0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 3>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&v2m0 {
+ arm,msi-base-spi = <64>;
+ arm,msi-num-spis = <256>;
+};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
new file mode 100644
index 0000000..f623c46
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
@@ -0,0 +1,54 @@
+/*
+ * DTS file for AMD Seattle Clocks
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+ adl3clk_100mhz: clk100mhz_0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "adl3clk_100mhz";
+ };
+
+ ccpclk_375mhz: clk375mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <375000000>;
+ clock-output-names = "ccpclk_375mhz";
+ };
+
+ sataclk_333mhz: clk333mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <333000000>;
+ clock-output-names = "sataclk_333mhz";
+ };
+
+ pcieclk_500mhz: clk500mhz_0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ clock-output-names = "pcieclk_500mhz";
+ };
+
+ dmaclk_500mhz: clk500mhz_1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ clock-output-names = "dmaclk_500mhz";
+ };
+
+ miscclk_250mhz: clk250mhz_4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "miscclk_250mhz";
+ };
+
+ uartspiclk_100mhz: clk100mhz_1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "uartspiclk_100mhz";
+ };
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
new file mode 100644
index 0000000..0c8e7ae
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -0,0 +1,172 @@
+/*
+ * DTS file for AMD Seattle SoC
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+/ {
+ compatible = "amd,seattle";
+ interrupt-parent = <&gic0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gic0: interrupt-controller@e1101000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0xe1110000 0 0x1000>,
+ <0x0 0xe112f000 0 0x2000>,
+ <0x0 0xe1140000 0 0x10000>,
+ <0x0 0xe1160000 0 0x10000>;
+ interrupts = <1 9 0xf04>;
+ ranges = <0 0 0 0xe1100000 0 0x100000>;
+ v2m0: v2m@e0080000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x0 0x00080000 0 0x1000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff04>,
+ <1 14 0xff04>,
+ <1 11 0xff04>,
+ <1 10 0xff04>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 7 4>,
+ <0 8 4>,
+ <0 9 4>,
+ <0 10 4>,
+ <0 11 4>,
+ <0 12 4>,
+ <0 13 4>,
+ <0 14 4>;
+ };
+
+ smb0: smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* DDR range is 40-bit addressing */
+ dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+
+ /include/ "amd-seattle-clks.dtsi"
+
+ sata0: sata@e0300000 {
+ compatible = "snps,dwc-ahci";
+ reg = <0 0xe0300000 0 0x800>;
+ interrupts = <0 355 4>;
+ clocks = <&sataclk_333mhz>;
+ dma-coherent;
+ };
+
+ i2c0: i2c@e1000000 {
+ status = "disabled";
+ compatible = "snps,designware-i2c";
+ reg = <0 0xe1000000 0 0x1000>;
+ interrupts = <0 357 4>;
+ clocks = <&uartspiclk_100mhz>;
+ };
+
+ serial0: serial@e1010000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0xe1010000 0 0x1000>;
+ interrupts = <0 328 4>;
+ clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ spi0: ssp@e1020000 {
+ status = "disabled";
+ compatible = "arm,pl022", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe1020000 0 0x1000>;
+ spi-controller;
+ interrupts = <0 330 4>;
+ clocks = <&uartspiclk_100mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ spi1: ssp@e1030000 {
+ status = "disabled";
+ compatible = "arm,pl022", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe1030000 0 0x1000>;
+ spi-controller;
+ interrupts = <0 329 4>;
+ clocks = <&uartspiclk_100mhz>;
+ clock-names = "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gpio0: gpio@e1040000 {
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe1040000 0 0x1000>;
+ gpio-controller;
+ interrupts = <0 359 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&uartspiclk_100mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@e1050000 {
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe1050000 0 0x1000>;
+ gpio-controller;
+ interrupts = <0 358 4>;
+ clocks = <&uartspiclk_100mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ ccp0: ccp@e0100000 {
+ status = "disabled";
+ compatible = "amd,ccp-seattle-v1a";
+ reg = <0 0xe0100000 0 0x10000>;
+ interrupts = <0 3 4>;
+ dma-coherent;
+ };
+
+ pcie0: pcie@f0000000 {
+ compatible = "pci-host-ecam-generic";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ bus-range = <0 0xff>;
+ msi-parent = <&v2m0>;
+ reg = <0 0xf0000000 0 0x10000000>;
+
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map =
+ <0x1000 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x120 0x1>,
+ <0x1000 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x121 0x1>,
+ <0x1000 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x122 0x1>,
+ <0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
+
+ dma-coherent;
+ dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+ ranges =
+ /* I/O Memory (size=64K) */
+ <0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
+ /* 32-bit MMIO (size=2G) */
+ <0x02000000 0x00 0x40000000 0x00 0x40000000 0x00 0x80000000>,
+ /* 64-bit MMIO (size= 124G) */
+ <0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
+ };
+ };
+};
--
1.9.3 (Apple Git-50)


\
 
 \ /
  Last update: 2014-11-26 06:21    [W:0.065 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site