lkml.org 
[lkml]   [2014]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/8] clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver
Date
From: Rajendra Nayak <rnayak@codeaurora.org>

Add an LCC driver for IPQ806x that supports the i2s, S/PDIF, and
pcm clocks.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
[sboyd@codeaurora.org: Reworded commit text, added Kconfig
select, fleshed out Kconfig description a bit more, added pll4
configuration and reworked probe for it, added muxes, split out
dt-binding file]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Change-Id: Idf4d008306a98d75d914c5625b46d15c6f7921b4
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-ipq806x.c | 12 ++
drivers/clk/qcom/lcc-ipq806x.c | 473 +++++++++++++++++++++++++++++++++++++++++
4 files changed, 495 insertions(+)
create mode 100644 drivers/clk/qcom/lcc-ipq806x.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 1107351ed346..07bce5f35eee 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -29,6 +29,15 @@ config IPQ_GCC_806X
Say Y if you want to use peripheral devices such as UART, SPI,
i2c, USB, SD/eMMC, etc.

+config IPQ_LCC_806X
+ tristate "IPQ806x LPASS Clock Controller"
+ select IPQ_GCC_806X
+ depends on COMMON_CLK_QCOM
+ help
+ Support for the LPASS clock controller on ipq806x devices.
+ Say Y if you want to use audio devices such as i2s, pcm,
+ S/PDIF, etc.
+
config MSM_GCC_8660
tristate "MSM8660 Global Clock Controller"
depends on COMMON_CLK_QCOM
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index f5e5607f3965..13c03a8808ec 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -13,6 +13,7 @@ clk-qcom-y += reset.o
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
+obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o
obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 5cd62a709ac7..206535531b86 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -75,6 +75,17 @@ static struct clk_pll pll3 = {
},
};

+static struct clk_regmap pll4_vote = {
+ .enable_reg = 0x34c0,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "pll4_vote",
+ .parent_names = (const char *[]){ "pll4" },
+ .num_parents = 1,
+ .ops = &clk_pll_vote_ops,
+ },
+};
+
static struct clk_pll pll8 = {
.l_reg = 0x3144,
.m_reg = 0x3148,
@@ -2163,6 +2174,7 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
[PLL0] = &pll0.clkr,
[PLL0_VOTE] = &pll0_vote,
[PLL3] = &pll3.clkr,
+ [PLL4_VOTE] = &pll4_vote,
[PLL8] = &pll8.clkr,
[PLL8_VOTE] = &pll8_vote,
[PLL14] = &pll14.clkr,
diff --git a/drivers/clk/qcom/lcc-ipq806x.c b/drivers/clk/qcom/lcc-ipq806x.c
new file mode 100644
index 000000000000..80a1ecf2fe69
--- /dev/null
+++ b/drivers/clk/qcom/lcc-ipq806x.c
@@ -0,0 +1,473 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+
+#include "common.h"
+#include "clk-regmap.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-branch.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+
+static struct clk_pll pll4 = {
+ .l_reg = 0x4,
+ .m_reg = 0x8,
+ .n_reg = 0xc,
+ .config_reg = 0x14,
+ .mode_reg = 0x0,
+ .status_reg = 0x18,
+ .status_bit = 16,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "pll4",
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
+static const struct pll_config pll4_config = {
+ .l = 0xf,
+ .m = 0x91,
+ .n = 0xc7,
+ .vco_val = 0x0,
+ .vco_mask = BIT(17) | BIT(16),
+ .pre_div_val = 0x0,
+ .pre_div_mask = BIT(19),
+ .post_div_val = 0x0,
+ .post_div_mask = BIT(21) | BIT(20),
+ .mn_ena_mask = BIT(22),
+ .main_output_mask = BIT(23),
+};
+
+#define P_PXO 0
+#define P_PLL4 1
+
+static const u8 lcc_pxo_pll4_map[] = {
+ [P_PXO] = 0,
+ [P_PLL4] = 2,
+};
+
+static const char *lcc_pxo_pll4[] = {
+ "pxo",
+ "pll4_vote",
+};
+
+static struct freq_tbl clk_tbl_aif_mi2s[] = {
+ { 1024000, P_PLL4, 4, 1, 96 },
+ { 1411200, P_PLL4, 4, 2, 139 },
+ { 1536000, P_PLL4, 4, 1, 64 },
+ { 2048000, P_PLL4, 4, 1, 48 },
+ { 2116800, P_PLL4, 4, 2, 93 },
+ { 2304000, P_PLL4, 4, 2, 85 },
+ { 2822400, P_PLL4, 4, 6, 209 },
+ { 3072000, P_PLL4, 4, 1, 32 },
+ { 3175200, P_PLL4, 4, 1, 31 },
+ { 4096000, P_PLL4, 4, 1, 24 },
+ { 4233600, P_PLL4, 4, 9, 209 },
+ { 4608000, P_PLL4, 4, 3, 64 },
+ { 5644800, P_PLL4, 4, 12, 209 },
+ { 6144000, P_PLL4, 4, 1, 16 },
+ { 6350400, P_PLL4, 4, 2, 31 },
+ { 8192000, P_PLL4, 4, 1, 12 },
+ { 8467200, P_PLL4, 4, 18, 209 },
+ { 9216000, P_PLL4, 4, 3, 32 },
+ { 11289600, P_PLL4, 4, 24, 209 },
+ { 12288000, P_PLL4, 4, 1, 8 },
+ { 12700800, P_PLL4, 4, 27, 209 },
+ { 13824000, P_PLL4, 4, 9, 64 },
+ { 16384000, P_PLL4, 4, 1, 6 },
+ { 16934400, P_PLL4, 4, 41, 238 },
+ { 18432000, P_PLL4, 4, 3, 16 },
+ { 22579200, P_PLL4, 2, 24, 209 },
+ { 24576000, P_PLL4, 4, 1, 4 },
+ { 27648000, P_PLL4, 4, 9, 32 },
+ { 33868800, P_PLL4, 4, 41, 119 },
+ { 36864000, P_PLL4, 4, 3, 8 },
+ { 45158400, P_PLL4, 1, 24, 209 },
+ { 49152000, P_PLL4, 4, 1, 2 },
+ { 50803200, P_PLL4, 1, 27, 209 },
+ { }
+};
+
+static struct clk_rcg mi2s_osr_src = {
+ .ns_reg = 0x48,
+ .md_reg = 0x4c,
+ .mn = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 24,
+ .m_val_shift = 8,
+ .width = 8,
+ },
+ .p = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .s = {
+ .src_sel_shift = 0,
+ .parent_map = lcc_pxo_pll4_map,
+ },
+ .freq_tbl = clk_tbl_aif_mi2s,
+ .clkr = {
+ .enable_reg = 0x48,
+ .enable_mask = BIT(9),
+ .hw.init = &(struct clk_init_data){
+ .name = "mi2s_osr_src",
+ .parent_names = lcc_pxo_pll4,
+ .num_parents = 2,
+ .ops = &clk_rcg_ops,
+ .flags = CLK_SET_RATE_GATE,
+ },
+ },
+};
+
+static const char *lcc_mi2s_parents[] = {
+ "mi2s_osr_src",
+};
+
+static struct clk_branch mi2s_osr_clk = {
+ .halt_reg = 0x50,
+ .halt_bit = 1,
+ .halt_check = BRANCH_HALT_ENABLE,
+ .clkr = {
+ .enable_reg = 0x48,
+ .enable_mask = BIT(17),
+ .hw.init = &(struct clk_init_data){
+ .name = "mi2s_osr_clk",
+ .parent_names = lcc_mi2s_parents,
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_regmap_div mi2s_div_clk = {
+ .reg = 0x48,
+ .shift = 10,
+ .width = 4,
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "mi2s_div_clk",
+ .parent_names = lcc_mi2s_parents,
+ .num_parents = 1,
+ .ops = &clk_regmap_div_ops,
+ },
+ },
+};
+
+static struct clk_branch mi2s_bit_div_clk = {
+ .halt_reg = 0x50,
+ .halt_bit = 0,
+ .halt_check = BRANCH_HALT_ENABLE,
+ .clkr = {
+ .enable_reg = 0x48,
+ .enable_mask = BIT(15),
+ .hw.init = &(struct clk_init_data){
+ .name = "mi2s_bit_div_clk",
+ .parent_names = lcc_mi2s_parents,
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+
+static struct clk_regmap_mux mi2s_bit_clk = {
+ .reg = 0x48,
+ .shift = 14,
+ .width = 1,
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "mi2s_bit_clk",
+ .parent_names = (const char *[]){
+ "mi2s_bit_div_clk",
+ "mi2s_codec_clk",
+ },
+ .num_parents = 2,
+ .ops = &clk_regmap_mux_closest_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct freq_tbl clk_tbl_pcm[] = {
+ { 64000, P_PLL4, 4, 1, 1536 },
+ { 128000, P_PLL4, 4, 1, 768 },
+ { 256000, P_PLL4, 4, 1, 384 },
+ { 512000, P_PLL4, 4, 1, 192 },
+ { 1024000, P_PLL4, 4, 1, 96 },
+ { 2048000, P_PLL4, 4, 1, 48 },
+ { },
+};
+
+static struct clk_rcg pcm_src = {
+ .ns_reg = 0x54,
+ .md_reg = 0x58,
+ .mn = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 16,
+ },
+ .p = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .s = {
+ .src_sel_shift = 0,
+ .parent_map = lcc_pxo_pll4_map,
+ },
+ .freq_tbl = clk_tbl_pcm,
+ .clkr = {
+ .enable_reg = 0x54,
+ .enable_mask = BIT(9),
+ .hw.init = &(struct clk_init_data){
+ .name = "pcm_src",
+ .parent_names = lcc_pxo_pll4,
+ .num_parents = 2,
+ .ops = &clk_rcg_ops,
+ .flags = CLK_SET_RATE_GATE,
+ },
+ },
+};
+
+static struct clk_branch pcm_clk_out = {
+ .halt_reg = 0x5c,
+ .halt_bit = 0,
+ .halt_check = BRANCH_HALT_ENABLE,
+ .clkr = {
+ .enable_reg = 0x54,
+ .enable_mask = BIT(11),
+ .hw.init = &(struct clk_init_data){
+ .name = "pcm_clk_out",
+ .parent_names = (const char *[]){ "pcm_src" },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_regmap_mux pcm_clk = {
+ .reg = 0x54,
+ .shift = 10,
+ .width = 1,
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "pcm_clk",
+ .parent_names = (const char *[]){
+ "pcm_clk_out",
+ "pcm_codec_clk",
+ },
+ .num_parents = 2,
+ .ops = &clk_regmap_mux_closest_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct freq_tbl clk_tbl_aif_osr[] = {
+ { 22050, P_PLL4, 1, 147, 20480 },
+ { 32000, P_PLL4, 1, 1, 96 },
+ { 44100, P_PLL4, 1, 147, 10240 },
+ { 48000, P_PLL4, 1, 1, 64 },
+ { 88200, P_PLL4, 1, 147, 5120 },
+ { 96000, P_PLL4, 1, 1, 32 },
+ { 176400, P_PLL4, 1, 147, 2560 },
+ { 192000, P_PLL4, 1, 1, 16 },
+ { },
+};
+
+static struct clk_rcg spdif_src = {
+ .ns_reg = 0xcc,
+ .md_reg = 0xd0,
+ .mn = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .p = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .s = {
+ .src_sel_shift = 0,
+ .parent_map = lcc_pxo_pll4_map,
+ },
+ .freq_tbl = clk_tbl_aif_osr,
+ .clkr = {
+ .enable_reg = 0xcc,
+ .enable_mask = BIT(9),
+ .hw.init = &(struct clk_init_data){
+ .name = "spdif_src",
+ .parent_names = lcc_pxo_pll4,
+ .num_parents = 2,
+ .ops = &clk_rcg_ops,
+ .flags = CLK_SET_RATE_GATE,
+ },
+ },
+};
+
+static const char *lcc_spdif_parents[] = {
+ "spdif_src",
+};
+
+static struct clk_branch spdif_clk = {
+ .halt_reg = 0xd4,
+ .halt_bit = 1,
+ .halt_check = BRANCH_HALT_ENABLE,
+ .clkr = {
+ .enable_reg = 0xcc,
+ .enable_mask = BIT(12),
+ .hw.init = &(struct clk_init_data){
+ .name = "spdif_clk",
+ .parent_names = lcc_spdif_parents,
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct freq_tbl clk_tbl_ahbix[] = {
+ { 131072, P_PLL4, 1, 1, 3 },
+ { },
+};
+
+static struct clk_rcg ahbix_clk = {
+ .ns_reg = 0x38,
+ .md_reg = 0x3c,
+ .mn = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 24,
+ .m_val_shift = 8,
+ .width = 8,
+ },
+ .p = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .s = {
+ .src_sel_shift = 0,
+ .parent_map = lcc_pxo_pll4_map,
+ },
+ .freq_tbl = clk_tbl_ahbix,
+ .clkr = {
+ .enable_reg = 0x38,
+ .enable_mask = BIT(10), /* toggle the gfmux to select mn/pxo */
+ .hw.init = &(struct clk_init_data){
+ .name = "ahbix",
+ .parent_names = lcc_pxo_pll4,
+ .num_parents = 2,
+ .ops = &clk_rcg_ops,
+ .flags = CLK_SET_RATE_GATE,
+ },
+ },
+};
+
+static struct clk_regmap *lcc_ipq806x_clks[] = {
+ [PLL4] = &pll4.clkr,
+ [MI2S_OSR_SRC] = &mi2s_osr_src.clkr,
+ [MI2S_OSR_CLK] = &mi2s_osr_clk.clkr,
+ [MI2S_DIV_CLK] = &mi2s_div_clk.clkr,
+ [MI2S_BIT_DIV_CLK] = &mi2s_bit_div_clk.clkr,
+ [MI2S_BIT_CLK] = &mi2s_bit_clk.clkr,
+ [PCM_SRC] = &pcm_src.clkr,
+ [PCM_CLK_OUT] = &pcm_clk_out.clkr,
+ [PCM_CLK] = &pcm_clk.clkr,
+ [SPDIF_SRC] = &spdif_src.clkr,
+ [SPDIF_CLK] = &spdif_clk.clkr,
+ [AHBIX_CLK] = &ahbix_clk.clkr,
+};
+
+static const struct regmap_config lcc_ipq806x_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0xfc,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc lcc_ipq806x_desc = {
+ .config = &lcc_ipq806x_regmap_config,
+ .clks = lcc_ipq806x_clks,
+ .num_clks = ARRAY_SIZE(lcc_ipq806x_clks),
+};
+
+static const struct of_device_id lcc_ipq806x_match_table[] = {
+ { .compatible = "qcom,lcc-ipq8064" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lcc_ipq806x_match_table);
+
+static int lcc_ipq806x_probe(struct platform_device *pdev)
+{
+ u32 val;
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &lcc_ipq806x_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ /* Configure the rate of PLL4 if the bootloader hasn't already */
+ val = regmap_read(regmap, 0x0, &val);
+ if (!val)
+ clk_pll_configure_sr(&pll4, regmap, &pll4_config, true);
+ /* Enable PLL4 source on the LPASS Primary PLL Mux */
+ regmap_write(regmap, 0xc4, 0x1);
+
+ return qcom_cc_really_probe(pdev, &lcc_ipq806x_desc, regmap);
+}
+
+static int lcc_ipq806x_remove(struct platform_device *pdev)
+{
+ qcom_cc_remove(pdev);
+ return 0;
+}
+
+static struct platform_driver lcc_ipq806x_driver = {
+ .probe = lcc_ipq806x_probe,
+ .remove = lcc_ipq806x_remove,
+ .driver = {
+ .name = "lcc-ipq806x",
+ .owner = THIS_MODULE,
+ .of_match_table = lcc_ipq806x_match_table,
+ },
+};
+module_platform_driver(lcc_ipq806x_driver);
+
+MODULE_DESCRIPTION("QCOM LCC IPQ806x Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:lcc-ipq806x");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


\
 
 \ /
  Last update: 2014-11-26 03:01    [W:0.071 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site