lkml.org 
[lkml]   [2014]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [tpmdd-devel] [PATCH v7 09/10] tpm: TPM 2.0 FIFO Interface
On 11/11/2014 08:45 AM, Jarkko Sakkinen wrote:
> From: Will Arthur <will.c.arthur@intel.com>
>
> Detect TPM 2.0 by using the extended STS (STS3) register. For TPM 2.0,
> instead of calling tpm_get_timeouts(), assign duration and timeout
> values defined in the TPM 2.0 PTP specification.
>
> Signed-off-by: Will Arthur <will.c.arthur@intel.com>
> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> ---
> drivers/char/tpm/tpm_tis.c | 71 ++++++++++++++++++++++++++++++++++++----------
> 1 file changed, 56 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 7a2c59b..0b3c089 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -1,5 +1,6 @@
> /*
> * Copyright (C) 2005, 2006 IBM Corporation
> + * Copyright (C) 2014 Intel Corporation
> *
> * Authors:
> * Leendert van Doorn <leendert@watson.ibm.com>
> @@ -44,6 +45,10 @@ enum tis_status {
> TPM_STS_DATA_EXPECT = 0x08,
> };
>
> +enum tis_status3 {
> + TPM_STS3_TPM2_FAM = 0x04,
> +};
> +
> enum tis_int_flags {
> TPM_GLOBAL_INT_ENABLE = 0x80000000,
> TPM_INTF_BURST_COUNT_STATIC = 0x100,
> @@ -70,6 +75,7 @@ enum tis_defaults {
> #define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
> #define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
> #define TPM_STS(l) (0x0018 | ((l) << 12))
> +#define TPM_STS3(l) (0x001b | ((l) << 12))
> #define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
>
> #define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
> @@ -344,6 +350,7 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
> {
> int rc;
> u32 ordinal;
> + unsigned long dur;
>
> rc = tpm_tis_send_data(chip, buf, len);
> if (rc < 0)
> @@ -355,9 +362,14 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
>
> if (chip->vendor.irq) {
> ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
> +
> + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> + dur = tpm_calc_ordinal_duration(chip, ordinal);
> + else
> + dur = tpm_calc_ordinal_duration(chip, ordinal);
> +

Is this right? Shouldn't you call tpm2_calc_ordinal_duration for TPM2?
If not don't check the flag but leave comment for why the same function
can be called for both TPM versions.


> if (wait_for_tpm_stat
> - (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> - tpm_calc_ordinal_duration(chip, ordinal),
> + (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
> &chip->vendor.read_queue, false) < 0) {
> rc = -ETIME;
> goto out_err;
> @@ -543,6 +555,7 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> u32 vendor, intfcaps, intmask;
> int rc, i, irq_s, irq_e, probe;
> struct tpm_chip *chip;
> + u8 sts3;
>
> chip = tpmm_chip_alloc(dev, &tpm_tis);
> if (IS_ERR(chip))
> @@ -554,11 +567,28 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> if (!chip->vendor.iobase)
> return -EIO;
>
> + sts3 = ioread8(chip->vendor.iobase + TPM_STS3(1));
> + if (sts3 & TPM_STS3_TPM2_FAM)
> + chip->flags = TPM_CHIP_FLAG_TPM2;
> +
> /* Default timeouts */
> - chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> - chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> - chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> - chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> + if (chip->flags & TPM_CHIP_FLAG_TPM2) {
> + chip->vendor.timeout_a = usecs_to_jiffies(TPM2_TIMEOUT_A);
> + chip->vendor.timeout_b = usecs_to_jiffies(TPM2_TIMEOUT_B);
> + chip->vendor.timeout_c = usecs_to_jiffies(TPM2_TIMEOUT_C);
> + chip->vendor.timeout_d = usecs_to_jiffies(TPM2_TIMEOUT_D);
> + chip->vendor.duration[TPM_SHORT] =
> + usecs_to_jiffies(TPM2_DURATION_SHORT);
> + chip->vendor.duration[TPM_MEDIUM] =
> + usecs_to_jiffies(TPM2_DURATION_MEDIUM);
> + chip->vendor.duration[TPM_LONG] =
> + usecs_to_jiffies(TPM2_DURATION_LONG);
> + } else {
> + chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> + chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> + chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> + chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> + }
>
> if (wait_startup(chip, 0) != 0) {
> rc = -ENODEV;
> @@ -573,8 +603,8 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
> chip->vendor.manufacturer_id = vendor;
>
> - dev_info(dev,
> - "1.2 TPM (device-id 0x%X, rev-id %d)\n",
> + dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
> + (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
> vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
>
> if (!itpm) {
> @@ -616,13 +646,17 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> dev_dbg(dev, "\tData Avail Int Support\n");
>
> /* get the timeouts before testing for irqs */
> - if (tpm_get_timeouts(chip)) {
> + if (!(chip->flags & TPM_CHIP_FLAG_TPM2) && tpm_get_timeouts(chip)) {
> dev_err(dev, "Could not get TPM timeouts and durations\n");
> rc = -ENODEV;
> goto out_err;
> }
>
> - if (tpm_do_selftest(chip)) {
> + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> + rc = tpm2_do_selftest(chip);
> + else
> + rc = tpm_do_selftest(chip);
> + if (rc) {
> dev_err(dev, "TPM self test failed\n");
> rc = -ENODEV;
> goto out_err;
> @@ -683,7 +717,10 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> chip->vendor.probed_irq = 0;
>
> /* Generate Interrupts */
> - tpm_gen_interrupt(chip);
> + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> + tpm2_gen_interrupt(chip);
> + else
> + tpm_gen_interrupt(chip);
>
> chip->vendor.irq = chip->vendor.probed_irq;
>
> @@ -759,14 +796,18 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
> static int tpm_tis_resume(struct device *dev)
> {
> struct tpm_chip *chip = dev_get_drvdata(dev);
> - int ret;
> + int ret = 0;
>
> if (chip->vendor.irq)
> tpm_tis_reenable_interrupts(chip);
>
> - ret = tpm_pm_resume(dev);
> - if (!ret)
> - tpm_do_selftest(chip);
> + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> + tpm2_do_selftest(chip);
> + else {
> + ret = tpm_pm_resume(dev);
> + if (!ret)
> + tpm_do_selftest(chip);
> + }

Only a self test necessary for TPM2 if resuming from ACPI sleep?

Other parts look good to me.
Stefan



\
 
 \ /
  Last update: 2014-11-25 23:21    [W:0.267 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site