lkml.org 
[lkml]   [2014]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC][PATCH 0/7] ftrace/x86: Clean up of mcount.S code
On Mon, 24 Nov 2014 17:34:04 -0800
Linus Torvalds <torvalds@linux-foundation.org> wrote:

> On Mon, Nov 24, 2014 at 4:42 PM, Steven Rostedt <rostedt@goodmis.org> wrote:
> >
> > Let me know if these changes have mcount.S give you less heebie-jeebies.
>
> So I haven't looked at the individual patches, I just looked at the
> rolled-up final patch in this email.
>
> And yes, from that final patch, I certainly like this much more. At
> least it now creates the frame in the obvious place, and the comments
> explain the layout.
>
> However, explain this (in the ftrace_caller_setup macro):
>
> #ifdef CC_USING_FENTRY
> - movq SS+16(%rsp), %rsi
> + movq MCOUNT_REG_SIZE+8+\added(%rsp), %rsi
> #else
> - movq 8(%rbp), %rsi
> + /* Need to grab the original %rbp */
> + movq RBP(%rsp), %rsi
> + /* Now parent address is 8 above original %rbp */
> + movq 8(%rsi), %rsi
> #endif
>
> Why isn't that "follow rbp" approach now *always* the right thing to
> do, regardless of fentry-vs-not? And in particular, couldn't you have
> made '%rsi' already contain that old rbp address in save_mcount_regs,
> the same way %rdi contains the RIP value?

Testing my code and watching it crash and burn, I remember why I did it
this way. When using "mcount", frame pointers are always compiled in,
when "fentry" is used, they may or may not be. That is, %rbp is
meaningless.

We have three scenarios:

1) mcount (and frame pointers)
2) fentry (and frame pointers)
3) fentry (and no frame pointers)

The functions that are traced look like this:

1)
func:
push %rbp
mov %rsp, %rbp
[ set up the rest of the frame ]
call mcount

That is, the call to the mcount trampoline is done where the
only way to get to the parent is by "8(%rbp)".

2)
func:
call fentry
push %rbp
mov %rsp, %rbp

Here, when the fentry trampoline is called, it contains the
return address of fentry (func:) and before that, the return
address of func itself (parent). %rbp holds the parent's frame
pointer. The only way to get to the parent is 8(%rsp) where
0(%rsp) is the return back to func.

3)
func:
call fentry
[ do whatever ]

This is the same as 2) but this time %rbp is meaning less.
And again, we need to get the parent with 8(%rsp).

But we can still have save_mcount_regs do all the work. Something like
this:


diff --git a/arch/x86/kernel/mcount_64.S b/arch/x86/kernel/mcount_64.S
index 003b22df1d87..ddc766efa1f1 100644
--- a/arch/x86/kernel/mcount_64.S
+++ b/arch/x86/kernel/mcount_64.S
@@ -54,7 +54,15 @@
* be saved in the locations that pt_regs has them in.
*/

-/* @added: the amount of stack added before calling this */
+/*
+ * @added: the amount of stack added before calling this
+ *
+ * After this is called, the following registers contain:
+ *
+ * %rdi - holds the address that called the trampoline
+ * %rsi - holds the parent function (traced function's return address)
+ * %rdx - holds the original %rbp
+ */
.macro save_mcount_regs added=0

/* Always save the original rbp */
@@ -101,9 +109,24 @@
movq MCOUNT_REG_SIZE-8(%rsp), %rdx
movq %rdx, RBP(%rsp)

+ /* Copy the parent address into %rsi (second parameter) */
+#ifdef CC_USING_FENTRY
+ movq MCOUNT_REG_SIZE+8+\added(%rsp), %rsi
+#else
+ /* %rdx contains original %rbp */
+ movq 8(%rdx), %rsi
+#endif
+
/* Move RIP to its proper location */
movq MCOUNT_REG_SIZE+\added(%rsp), %rdi
movq %rdi, RIP(%rsp)
+
+ /*
+ * Now %rdi (the first parameter) has the return address of
+ * where ftrace_call returns. But the callbacks expect the
+ * the address of the call itself.
+ */
+ subq $MCOUNT_INSN_SIZE, %rdi
.endm

.macro restore_mcount_regs
@@ -122,28 +145,6 @@

.endm

-/* skip is set if stack has been adjusted */
-.macro ftrace_caller_setup trace_label added=0
- save_mcount_regs \added
-
- /* Save this location */
-GLOBAL(\trace_label)
- /* Load the ftrace_ops into the 3rd parameter */
- movq function_trace_op(%rip), %rdx
-
- /* %rdi already has %rip from the save_mcount_regs macro */
- subq $MCOUNT_INSN_SIZE, %rdi
- /* Load the parent_ip into the second parameter */
-#ifdef CC_USING_FENTRY
- movq MCOUNT_REG_SIZE+8+\added(%rsp), %rsi
-#else
- /* Need to grab the original %rbp */
- movq RBP(%rsp), %rsi
- /* Now parent address is 8 above original %rbp */
- movq 8(%rsi), %rsi
-#endif
-.endm
-
#ifdef CONFIG_DYNAMIC_FTRACE

ENTRY(function_hook)
@@ -151,7 +152,13 @@ ENTRY(function_hook)
END(function_hook)

ENTRY(ftrace_caller)
- ftrace_caller_setup ftrace_caller_op_ptr
+ /* save_mcount_regs fills in first two parameters */
+ save_mcount_regs
+
+GLOBAL(ftrace_caller_op_ptr)
+ /* Load the ftrace_ops into the 3rd parameter */
+ movq function_trace_op(%rip), %rdx
+
/* regs go into 4th parameter (but make it NULL) */
movq $0, %rcx

@@ -182,7 +189,12 @@ ENTRY(ftrace_regs_caller)
pushfq

/* added 8 bytes to save flags */
- ftrace_caller_setup ftrace_regs_caller_op_ptr 8
+ save_mcount_regs 8
+ /* save_mcount_regs fills in first two parameters */
+
+GLOBAL(ftrace_regs_caller_op_ptr)
+ /* Load the ftrace_ops into the 3rd parameter */
+ movq function_trace_op(%rip), %rdx

/* Save the rest of pt_regs */
movq %r15, R15(%rsp)
@@ -263,7 +275,8 @@ GLOBAL(ftrace_stub)
retq

trace:
- ftrace_caller_setup ftrace_caller_op_ptr
+ /* save_mcount_regs fills in first two parameters */
+ save_mcount_regs

call *ftrace_trace_function

@@ -276,16 +289,16 @@ END(function_hook)

#ifdef CONFIG_FUNCTION_GRAPH_TRACER
ENTRY(ftrace_graph_caller)
+ /* Saves rbp into %rdx */
save_mcount_regs

#ifdef CC_USING_FENTRY
leaq MCOUNT_REG_SIZE+8(%rsp), %rdi
movq $0, %rdx /* No framepointers needed */
#else
- /* Need to grab the original %rbp */
- movq RBP(%rsp), %rdx
- /* Now parent address is 8 above original %rbp */
+ /* Save address of the return address of traced function */
leaq 8(%rdx), %rdi
+ /* ftrace does sanity checks against frame pointers */
movq (%rdx), %rdx
#endif
movq RIP(%rsp), %rsi

-- Steve


\
 
 \ /
  Last update: 2014-11-25 04:21    [W:1.071 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site