lkml.org 
[lkml]   [2014]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/5] x86, traps: Track entry into and exit from IST context
On Sat, Nov 22, 2014 at 3:41 PM, Paul E. McKenney
<paulmck@linux.vnet.ibm.com> wrote:
> On Fri, Nov 21, 2014 at 09:53:29PM -0800, Andy Lutomirski wrote:
>> On Fri, Nov 21, 2014 at 8:20 PM, Paul E. McKenney
>> <paulmck@linux.vnet.ibm.com> wrote:
>> > On Fri, Nov 21, 2014 at 06:00:14PM -0800, Andy Lutomirski wrote:
>> >> On Fri, Nov 21, 2014 at 3:38 PM, Paul E. McKenney
>> >> <paulmck@linux.vnet.ibm.com> wrote:

> Returning state sounds like a bad idea, if we can reasonably avoid it.

I agree, except that we already do it for exception_enter(), etc. But
yes, changing fewer things is nice.

>
> And I think I finally see what you are pointing out about my code: If
> another NMI comes in between the time I increment ->dynticks_nmi_nesting
> and the time I atomically increment ->dynticks, the nested NMI handler
> will incorrectly believe that RCU is already paying attention to this CPU.
> Which would indeed not be at all good, so good catch!!!
>
>> Otherwise, I think that there may need to be enough state somewhere so
>> that the outermost nested rcu_nmi_enter knows whether to increment
>> dynticks. For example, dynticks_nmi_nesting could store the nesting
>> count * 2 - (1 if the outermost nested user needs to increment
>> dynticks). Something like:
>>
>> void rcu_nmi_enter(void)
>> {
>> /* Be very careful -- this function may be called reentrently on the
>> same CPU. */
>> atomically: increment dynticks if it's even.
>>
>> /* If an rcu_nmi_enter/rcu_nmi_exit pair happens here, then it will not change
>> * the state. */
>>
>> local_inc(&dynticks_nmi_nesting, (we incremented dynticks ? 1 : 2));
>>
>> WARN_ON(we incremented dynticks and dynticks_nmi_nesting was nonzero);
>> }
>>
>> void rcu_nmi_exit(void)
>> {
>> WARN_ON(!(dynticks & 1));
>> locally atomically: dynticks_nmi_nesting -= 2, unless
>> dynticks_nmi_nesting == 1, in which case set it to zero
>>
>> if (dynticks_nmi_nesting was 1)
>> atomic_inc(&dynticks);
>> }
>>
>> The invariant here is that, for a single unnested enter/exit, if
>> dynticks_nmi_nesting != 0, then dynticks is odd. As a result, an
>> rcu_nmi_enter/rcu_nmi_exit pair at any time when dynticks_nmi_nesting
>> != 0 *or* dynticks is odd will have no net effect, so the invariant,
>> in fact, holds for all invocations, nested or otherwise.
>>
>> At least one of those conditions is true at all times during the
>> execution of outermost pair, starting with the first atomic operation
>> and ending with the final atomic_inc. So they nest properly no matter
>> what else happens (unless, of course, someone else pokes dynticks in
>> the middle).
>>
>> Thoughts?
>
> Let's see... The evenness of ->dynticks should be preserved by nested NMI
> handlers, so the check and increment need not be atomic. We don't have
> any way (other than atomic operations) to do local atomic modifications
> on all architectures, because we cannot mask NMIs. (Yes, it can work
> on x86, but this is common code that needs to work everywhere.) On the
> other hand, presumably NMIs are rare, so atomic modification of the NMI
> nesting counter should be OK, at least if it proves absolutely necessary.
> And I am thinking that a mechanical proof will be needed here. :-/
>
> But first, let me try generating the code and informally evaluating it:
>
> 1 struct rcu_dynticks {
> 2 long long dynticks_nesting;
> 3 int dynticks_nmi_nesting;
> 4 atomic_t dynticks;
> 5 };
> 6
> 7 void rcu_nmi_enter(void)
> 8 {
> 9 struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
> 10 int incby = 2;
> 11
> 12 if (!(atomic_read(&rdtp->dynticks) & 0x1)) {
> 13 smp_mb__before_atomic();
> 14 atomic_inc(&rdtp->dynticks);
> 15 smp_mb__after_atomic();
> 16 WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
> 17 incby = 1;

WARN_ON_ONCE(rdtp->dynticks_nmi_nesting < 1) here, perhaps?

> 18 }
> 19 rdtp->dynticks_nmi_nesting += incby;

Oh, I see why you don't need local_add -- it's because an nmi in the
middle of this increment won't have any effect on the interrupted
code, so even a software RMW will be okay.

> 20 barrier();
> 21 }
> 22
> 23 void rcu_nmi_exit(void)
> 24 {
> 25 struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
> 26
> 27 WARN_ON_ONCE(!rdtp->dynticks_nmi_nesting);
> 28 WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
> 29 if (rdtp->dynticks_nmi_nesting != 1) {

WARN_ON_ONCE(rdtp->dynticks_nmi_nesting < 2), perhaps?

> 30 rdtp->dynticks_nmi_nesting -= 2;
> 31 return;
> 32 }
> 33 rdtp->dynticks_nmi_nesting = 0;
> 34 smp_mb__before_atomic();

This implies barrier(), right?

> 35 atomic_inc(&rdtp->dynticks);
> 36 smp_mb__after_atomic();
> 37 WARN_ON_ONCE(atomic_read(&rdtp->dynticks) & 0x1);
> 38 }
>
> Line 9 picks up a pointer to this CPU's rcu_dynticks structure and line 10
> assumes that we don't need to increment ->dynticks.
>
> Line 12 checks to see if ->dynticks is even. Note that this check is
> stable: If there are nested NMIs, they will increment ->dynticks twice
> or not at all, and either way preserves the evenness (to be proven, of
> course, but that is the plan). If ->dynticks is even, lines 13-15
> atomically increment it, line 16 complains if still even, and line 17
> says we will increment ->dynticks_nmi_nesting by only 1.
>
> Either way, line 19 increments ->dynticks_nmi_nesting as needed and
> line 20 keeps the compiler from getting too cute.
>
> For rcu_nmi_exit(), line 25 again picks up this CPUs rcu_dynticks
> structure. Lines 27 and 28 complain bitterly if invariants are violated.
> If line 29 finds that the value of ->dynticks_nmi_nesting is not 1,
> then line 30 subtracts 2 from ->dynticks_nmi_nesting and line 31 returns.
>
> Otherwise, line 33 sets ->dynticks_nmi_nesting to zero, lines 34-36
> atomically increment ->dynticks with full ordering, and line 37
> complains bitterly if ->dynticks is not even.
>
> So, if an NMI occurs before rcu_nmi_enter's atomic increment, then the
> nested NMI's rcu_nmi_enter() and rcu_nmi_exit() will think that they are
> not nested, which is the correct thing for them to think in that case.
> They will increment ->dynticks twice and restore ->dynticks_nmi_nesting
> to zero (adding and then subtracting 1). If the NMI happens after the
> atomic increment, then the nested rcu_nmi_enter() and rcu_nmi_exit()
> will leave ->dynticks alone, and will restore ->dynticks_nmi_nesting
> to zero (adding and subtracting two again). If the NMI happens after
> the increment of ->dynticks_nmi_nesting, the nested NMI's rcu_nmi_enter()
> and rcu_nmi_exit() will again restore ->dynticks_nmi_nesting, but this
> time to one (again adding and subtracting two).
>
> In rcu_nmi_exit(), ->dynticks_nmi_nesting of zero had better not happen,
> one means we need to atomically increment ->dynticks, and other values
> mean that we are partially or fully nested. Reasoning proceeds as for
> rcu_nmi_enter(), but in the opposite direction.
>
> Whew! That might even work.

I think I like this, with the warnings above.

>
> But how about taking a different approach. Assuming that there can
> never be more than (say) 14 nesting NMI-like things, use the lower
> four bits of ->dynticks to represent the NMI nesting and the upper
> 28 bits as the counter. This of course requires modifying lots of
> places in RCU that check the counter, but it is probably time to
> abstract the check anyway.
>
> This would allow my earlier attempted logic to work and (maybe) simplify
> the reasoning a bit (and yes, the "magic" constants need macros):
>
> void rcu_nmi_enter(void)
> {
> struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
> int nesting = atomic_read(&rdtp->dynticks) & 0xf;
> int incby = 0x01;
>
> WARN_ON_ONCE(nexting == 0xf);
> if (nesting == 0) {
> if (atomic_read(&rdtp->dynticks) & 0x10)
> return;
> incby = 0x11;
> }
> smp_mb__before_atomic();
> atomic_add(&rdtp->dynticks, incby);
> smp_mb__after_atomic();
> WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
> }
>
> void rcu_nmi_exit(void)
> {
> struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
> int nesting = atomic_read(&rdtp->dynticks) & 0xf;
> int incby = 0x0f;
>
> if (nesting == 0)
> return;
> if (nesting > 1)
> incby = -1;
> smp_mb__before_atomic();
> atomic_add(&rdtp->dynticks, incby);
> smp_mb__after_atomic();
> WARN_ON_ONCE(atomic_read(&rdtp->dynticks) & 0x1);
> }
>
> Over to you! ;-)

This latter one is all you :)

--Andy

>
> Thanx, Paul
>



--
Andy Lutomirski
AMA Capital Management, LLC


\
 
 \ /
  Last update: 2014-11-24 22:01    [W:0.111 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site