lkml.org 
[lkml]   [2014]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/2] pinctrl: exynos: Add BUS1 pin controller for exynos7
Date
USB and Power regulator on Exynos7 require gpios available
in BUS1 pin controller block.
So adding the BUS1 pinctrl support.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
---

This patch was part of series:
"[PATCH 00/11] Exynos7: Adding USB 3.0 support"
https://lkml.org/lkml/2014/11/21/247

Changes since V1:
- Added support for all pin banks which are part of BUS1 pin controller.

drivers/pinctrl/samsung/pinctrl-exynos.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d5d4cfc..44e60dc 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -1300,6 +1300,20 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c),
};

+/* pin banks of exynos7 pin-controller - BUS1 */
+static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpf1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf2", 0x08),
+ EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpf3", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpf4", 0x10),
+ EXYNOS_PIN_BANK_EINTG(8, 0x0c0, "gpf5", 0x14),
+ EXYNOS_PIN_BANK_EINTG(5, 0x0e0, "gpg1", 0x18),
+ EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpg2", 0x1c),
+ EXYNOS_PIN_BANK_EINTG(6, 0x120, "gph1", 0x20),
+ EXYNOS_PIN_BANK_EINTG(3, 0x140, "gpv6", 0x24),
+};
+
const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 Alive data */
@@ -1342,5 +1356,10 @@ const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = {
.pin_banks = exynos7_pin_banks7,
.nr_banks = ARRAY_SIZE(exynos7_pin_banks7),
.eint_gpio_init = exynos_eint_gpio_init,
+ }, {
+ /* pin-controller instance 8 BUS1 data */
+ .pin_banks = exynos7_pin_banks8,
+ .nr_banks = ARRAY_SIZE(exynos7_pin_banks8),
+ .eint_gpio_init = exynos_eint_gpio_init,
},
};
--
1.7.10.4


\
 
 \ /
  Last update: 2014-11-24 14:41    [W:0.151 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site