lkml.org 
[lkml]   [2014]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] regulator: add a regulator that constrain its supply
Date
This driver is meant for devices that are supplied by a settable
regulator but that don't set their supply voltage explicitly.
With this reglator those simple driver can just get and enable the
regulator and they will get the correct voltage.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
---
drivers/regulator/Kconfig | 8 +++
drivers/regulator/Makefile | 1 +
drivers/regulator/constrained-supply.c | 126 +++++++++++++++++++++++++++++++++
3 files changed, 135 insertions(+)
create mode 100644 drivers/regulator/constrained-supply.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c8767b7..ebfd9a7 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -54,6 +54,14 @@ config REGULATOR_USERSPACE_CONSUMER

If unsure, say no.

+config REGULATOR_CONSTRAINED_SUPPLY
+ tristate "Voltage regulator that constrain its supply"
+ depends on OF
+ help
+ This driver provides a virtual regulator that constrains its supply.
+ This is mostly useful to use drivers that don't explicitly set a
+ voltage on boards that use variable regulators.
+
config REGULATOR_88PM800
tristate "Marvell 88PM800 Power regulators"
depends on MFD_88PM800
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 37bb4b7..99c7979 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_OF) += of_regulator.o
obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
+obj-$(CONFIG_REGULATOR_CONSTRAINED_SUPPLY) += constrained-supply.o

obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
diff --git a/drivers/regulator/constrained-supply.c b/drivers/regulator/constrained-supply.c
new file mode 100644
index 0000000..1ab94b0
--- /dev/null
+++ b/drivers/regulator/constrained-supply.c
@@ -0,0 +1,126 @@
+/*
+ * Regulator driver that constrain its supply
+ *
+ * Copyright (C) 2014 - Alban Bedel
+ *
+ * Author: Alban Bedel <alban.bedel@avionic-design.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+/* Here we can't use rdev->supply as these functions are also
+ * called before the supply is set.
+ */
+static int constrained_supply_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV,
+ unsigned *selector)
+{
+ struct regulator *supply = rdev_get_drvdata(rdev);
+
+ return regulator_set_voltage(supply, min_uV, max_uV);
+}
+
+static int constrained_supply_get_voltage(struct regulator_dev *rdev)
+{
+ struct regulator *supply = rdev_get_drvdata(rdev);
+
+ return regulator_get_voltage(supply);
+}
+
+static int constrained_supply_regulator_enable(struct regulator_dev *rdev)
+{
+ return 0;
+}
+
+static int constrained_supply_regulator_disable(struct regulator_dev *rdev)
+{
+ return 0;
+}
+
+static int constrained_supply_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ return rdev->use_count > 0;
+}
+
+static struct regulator_ops constrained_supply_regulator_ops = {
+ .get_voltage = constrained_supply_get_voltage,
+ .set_voltage = constrained_supply_set_voltage,
+ .enable = constrained_supply_regulator_enable,
+ .disable = constrained_supply_regulator_disable,
+ .is_enabled = constrained_supply_regulator_is_enabled,
+};
+
+static const struct regulator_desc constrained_supply_regulator_desc = {
+ .name = "constrained-supply",
+ .ops = &constrained_supply_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .supply_name = "vin",
+};
+
+static int constrained_supply_regulator_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct regulator_config config = {};
+ struct regulator_dev *regulator;
+ struct regulator *supply;
+
+ if (!np)
+ return -EINVAL;
+
+ /* We need the supply to be available */
+ supply = devm_regulator_get(&pdev->dev,
+ constrained_supply_regulator_desc.supply_name);
+ if (IS_ERR(supply)) {
+ dev_err(&pdev->dev, "Failed to get supply regulator\n");
+ return PTR_ERR(supply);
+ }
+
+ config.init_data = of_get_regulator_init_data(&pdev->dev, np);
+ if (!config.init_data)
+ return -ENOMEM;
+
+ config.of_node = np;
+ config.dev = &pdev->dev;
+ config.driver_data = supply;
+
+ regulator = devm_regulator_register(
+ &pdev->dev, &constrained_supply_regulator_desc, &config);
+ if (IS_ERR(regulator)) {
+ dev_err(&pdev->dev, "Failed to register regulator\n");
+ return PTR_ERR(regulator);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id constrained_supply_of_match[] = {
+ { .compatible = "regulator-constrained-supply" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, constrained_supply_of_match);
+
+static struct platform_driver constrained_supply_regulator_driver = {
+ .driver = {
+ .name = "constrained-supply-regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(constrained_supply_of_match),
+ },
+ .probe = constrained_supply_regulator_probe,
+};
+module_platform_driver(constrained_supply_regulator_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alban Bedel <alban.bedel@avionic-design.de>");
+MODULE_DESCRIPTION("Constrained Supply Regulator Driver");
+MODULE_ALIAS("platform:-regulator");
--
2.1.3


\
 
 \ /
  Last update: 2014-11-24 14:41    [W:0.097 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site