lkml.org 
[lkml]   [2014]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 1/2] ARM: keystone: pm: switch to use generic pm domains
Date
Grygorii Strashko <grygorii.strashko@ti.com> writes:

> Hi Kevin,
> On 11/21/2014 10:06 AM, Geert Uytterhoeven wrote:
>> On Fri, Nov 21, 2014 at 2:30 AM, Kevin Hilman <khilman@kernel.org> wrote:
>>> Geert Uytterhoeven <geert@linux-m68k.org> writes:
>>>> On Thu, Nov 20, 2014 at 10:48 PM, Kevin Hilman <khilman@kernel.org> wrote:
>>>>>>> So what exactly are we talking about with "PM" clocks, and why are they
>>>>>>> "special" when it comes to PM domains? IOW, why are the clocks to be
>>>>>>> managed during PM domain transitions for a given device any different
>>>>>>> than the clocks that need to be managed for a runtime suspend/resume (or
>>>>>>> system suspend/resume) sequence for the same device?
>>>>>>
>>>>>> (Speaking for my case, shmobile)
>>>>>>
>>>>>> They're not. The clocks to be managed during PM domain transitions are the
>>>>>> same as the clocks that need to be managed for a runtime suspend/resume
>>>>>> (or system suspend/resume) sequence.
>>>>>>
>>>>>> The special thing is that this is more a platform than a driver thing: the same
>>>>>> module may have a "PM/functional" clock (that is documented to enable/disable
>>>>>> the module) on one Soc, but noet on another.
>>>>>
>>>>> So why isn't the presence or absence of the clock described in the .dtsi
>>>>> for the SoC instead of being handled by special PM domain logic?
>>>>
>>>> It is. Cfr. the presence/absence of clocks for renesas,rcar-gpio nodes.
>>>
>>> Hmm, OK, Good.
>>>
>>> So now I'm confused about why the PM domain has to do anything special
>>> if the presence/absence of the clocks is already handled by the DT.
>>
>> Just adding a clock property to a device node in DT doesn't enable the clock
>> automatically, nor make it runtime-managed automatically.
>> Compare this to e.g. pinctrl, where adding pinctrl properties to DT does enable
>> them automatically, without the driver for the device having to care about it.
>>
>> Drivers interfacing external hardware typically do care about clocks, as they
>> have to program clock generators for the external hardware interface (e.g.
>> driving spi or i2c buses at specific frequencies).
>>
>> Other random drivers don't care about clocks, so they don't handle them.
>> But as long as they make basic pm_runtime_{enable,get_sync,put}() calls,
>> the (optional) clocks (and hardware PM domains) will "work" fine, if handled
>> by the PM (clock) domain.
>
> Personally, I don't see problems with "functional" clocks.
> The problem, in my opinion, is that we can't specify in DT that some clock is
> "optional", so no one should touch such clock except driver.
> For example:
> Keystone 2 NETCP module has 3 clocks:
> clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
> clock-names = "clk_pa", "clk_cpgmac", "cpsw_cpts_rft_clk";
> and CPTS functionality is optional (in general) and can be enabled/disabled.
> Also, usual example is MMC hosts
> - OMAP hsmmc has "functional" clock "hsmmc1_fclk", and may have
> "optional" clock "mmchsdb_fck". As you may remember, PM runtime
> for OMAP2+ implemented by OMAP PM domain which performs many things,
> but one thing which is done always is enabling/disabling of "fck"
> when get/put() are called.
>
> Actually, pm_clk is very simple case of OMAP PM domain which should only
> handle clocks.
>
> In non-DT case, we have possibility to divide clocks on "fck" and "opt"
> (The way it can be done is not convenient, but it is - .con_id).
>
> For DT-case - no way now. Also, PM domains are not physically present on
> Keystone 2 and GPD was selected as glue layer to integrate DT, pm_clk and
> PM runtime all together (one big-fat-global PM domain :).
>
> So, I was able to find only following way to define "fck" clocks in DT:
> clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
> clock-names = "clk_pa", "clk_cpgmac", "cpsw_cpts_rft_clk";
> fck-clocks = <&papllclk>, <&clkcpgmac>;
> As you can see - this will lead to data duplication in DT (
>
> Any propositions are welcome?

How about you proposed a new (optional) property for the clock bindings
called 'clocks-optional' or something like that. The clock maintainer
(Mike Turquette, Cc'd) is also very familiar with OMAP and the need for
these different kinds of clocks.

Kevin



\
 
 \ /
  Last update: 2014-11-21 21:01    [W:0.088 / U:0.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site