lkml.org 
[lkml]   [2014]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/11] pinctrl: exynos: Add BUS1 pin controller for exynos7
Date
USB and Power regulator on Exynos7 require gpios available
in BUS1 pin controller block.
So adding the BUS1 pinctrl support.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d5d4cfc..caca5b5 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -1300,6 +1300,13 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c),
};

+/* pin banks of exynos7 pin-controller - BUS1 */
+static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpf4", 0x10),
+ EXYNOS_PIN_BANK_EINTG(6, 0x120, "gph1", 0x20),
+};
+
const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 Alive data */
@@ -1342,5 +1349,10 @@ const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = {
.pin_banks = exynos7_pin_banks7,
.nr_banks = ARRAY_SIZE(exynos7_pin_banks7),
.eint_gpio_init = exynos_eint_gpio_init,
+ }, {
+ /* pin-controller instance 8 BUS1 data */
+ .pin_banks = exynos7_pin_banks8,
+ .nr_banks = ARRAY_SIZE(exynos7_pin_banks8),
+ .eint_gpio_init = exynos_eint_gpio_init,
},
};
--
1.7.10.4


\
 
 \ /
  Last update: 2014-11-21 15:21    [W:0.162 / U:5.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site