lkml.org 
[lkml]   [2014]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 12/13] ARM: dts: berlin: add BG2CD nodes for USB support
On 17.11.2014 14:35, Antoine Tenart wrote:
> From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>
> Adds nodes describing the Marvell Berlin BG2CD USB PHY and USB. The BG2CD
> SoC has 2 USB ChipIdea controllers, with usb0 host-only and usb1 dual-role
> capable.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>

Applied to berlin/dt with usb-phy nodes reordered correctly (ethernet
nodes came in between in the meantime).

Thanks!

> ---
> arch/arm/boot/dts/berlin2cd.dtsi | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
> index 68f7032b4686..af5e628547ce 100644
> --- a/arch/arm/boot/dts/berlin2cd.dtsi
> +++ b/arch/arm/boot/dts/berlin2cd.dtsi
> @@ -66,6 +66,22 @@
> clocks = <&chip CLKID_TWD>;
> };
>
> + usb_phy0: usb-phy@b74000 {
> + compatible = "marvell,berlin2cd-usb-phy";
> + reg = <0xb74000 0x128>;
> + #phy-cells = <0>;
> + resets = <&chip 0x178 23>;
> + status = "disabled";
> + };
> +
> + usb_phy1: usb-phy@b78000 {
> + compatible = "marvell,berlin2cd-usb-phy";
> + reg = <0xb78000 0x128>;
> + #phy-cells = <0>;
> + resets = <&chip 0x178 24>;
> + status = "disabled";
> + };
> +
> apb@e80000 {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -242,6 +258,26 @@
> };
> };
>
> + usb0: usb@ed0000 {
> + compatible = "chipidea,usb2";
> + reg = <0xed0000 0x200>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&chip CLKID_USB0>;
> + phys = <&usb_phy0>;
> + phy-names = "usb-phy";
> + status = "disabled";
> + };
> +
> + usb1: usb@ee0000 {
> + compatible = "chipidea,usb2";
> + reg = <0xee0000 0x200>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&chip CLKID_USB1>;
> + phys = <&usb_phy1>;
> + phy-names = "usb-phy";
> + status = "disabled";
> + };
> +
> apb@fc0000 {
> compatible = "simple-bus";
> #address-cells = <1>;
>



\
 
 \ /
  Last update: 2014-11-18 21:21    [W:0.093 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site