lkml.org 
[lkml]   [2014]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [patch 08/16] genirq: Introduce callback irq_chip.irq_write_msi_msg
On 2014/11/18 21:52, Yun Wu (Abel) wrote:
> On 2014/11/18 21:43, Jiang Liu wrote:
>
>> On 2014/11/18 21:33, Yun Wu (Abel) wrote:
>>> On 2014/11/18 18:19, Thomas Gleixner wrote:
>>>
>>>> On Tue, 18 Nov 2014, Yun Wu (Abel) wrote:
>>>>> On 2014/11/12 21:43, Thomas Gleixner wrote:
>>>>>> struct irq_chip {
>>>>>> @@ -359,6 +360,7 @@ struct irq_chip {
>>>>>> void (*irq_release_resources)(struct irq_data *data);
>>>>>>
>>>>>> void (*irq_compose_msi_msg)(struct irq_data *data, struct msi_msg *msg);
>>>>>> + void (*irq_write_msi_msg)(struct irq_data *data, struct msi_msg *msg);
>>>>>
>>>>> Hmm... It's really weird.
>>>>> I don't think it's the interrupt controllers' responsibility to write messages
>>>>> for all the endpoint devices since the methods of configuring message registers
>>>>> may different between these devices. And theoretically, the endpoint devices
>>>>> themselves should take the responsibility to configure their message registers.
>>>>> To say the least, the write_msg callback here still need to call some certain
>>>>> interfaces provided by the corresponding device.
>>>>>
>>>>> There would be lots of ARM new devices capable of sending message
>>>>> based interrupts to interrupt controllers, does all the drivers of
>>>>> the devices need to expose a write_msg callback to interrupt
>>>>> controllers?
>>>>
>>>> Well, writing the message _IS_ part of the interrupt controller.
>>>>
>>>> So in order to enable non PCI based MSI we want to have generic
>>>> infrastructure with minimal per device/device class callbacks and of
>>>> course you need to provide that callback for your special device.
>>>>
>>>> We already have non PCI based MSI controllers in x86 today and we need
>>>> to handle the whole stuff with tons of copied coded extra for each of
>>>> those. So consolidating it into common infrastructure allows us to get
>>>> rid of the pointless copied code and reduce the per device effort to
>>>> the relevant hardware specific callbacks. irq_write_msi_msg being one
>>>> of those.
>>>>
>>>
>>> At least, we have the same goal.
>>> I will illustrate my thoughts by an example.
>>> The current code is something like:
>>>
>>> Device A
>>> ========
>>> void A_write_msg() { ... }
>>>
>>> Group B
>>> (a group of devices behave same on writing messages, i.e. PCI)
>>> =======
>>> void B_write_msg() { ... }
>>>
>>> Controller
>>> ==========
>>> irq_chip.irq_write_msi_msg () {
>>> if (A)
>>> A_write_msg();
>>> if (B)
>>> B_write_msg();
>>> }
>>>
>>> It's horrible when new devices come out, since we need to modify the
>>> controller part for each new device.
>>> What I suggested is:
>>>
>>> MSI Core
>>> ========
>>> struct msi_ops { .write_msg, };
>>> struct msi_desc { .msi_ops, };
>>>
>>> write_msg() {
>>> X = get_dev();
>>> irq_chip.compose_msg(X); // IRQ chips' responsibility
>>> X_msi_ops.write_msg(); // nothing to do with IRQ chips
>>> }
>>>
>>> Device A
>>> ========
>>> void A_write_msg() { ... }
>>> A_msi_ops.write_msg = A_write_msg;
>>>
>>> Group B
>>> =======
>>> void B_write_msg() { ... }
>>> B_msi_ops.write_msg = B_write_msg;
>>>
>>> Please correct me if I misunderstood anything.
>> Hi Yun,
>> We provide an irq_chip for each type of interrupt controller
>> instead of devices. For the example mentioned above, if device A
>> and Group B has different interrupt controllers, we just need to
>> implement irq_chip_A and irq_chip_B and set irq_chip.irq_write_msi_msg()
>> to suitable callbacks.
>> The framework already achieves what you you want:)
>
> What if device A and group B have the same interrupt controller?
Device doesn't care about interrupt controllers, it just cares about
interrupts used by itself. It's the interrupt source (controller)
enumerators' responsibility to discover interrupt source, associate
methods to control the interrupt source and assign irq numbers for
interrupt sources.
There are two ways to associate irq numbers with device:
1) arch code/bus drivers statically assigns irq number for devices
when creating device objects, such as PCI legacy interrupt
(INTA-INTD), IOAPIC interrupts.
2) device drivers ask interrupt source enumerators to dynamically
create irq numbers, such pci_enable_msix_range() and friends.
So device driver definitely doesn't need to known about irq_chip
methods to control interrupt sources.
Regards!
Gerry


\
 
 \ /
  Last update: 2014-11-18 15:41    [W:2.058 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site