Messages in this thread Patch in this message | | | Date | Tue, 18 Nov 2014 15:03:37 +0300 | From | Konstantin Khlebnikov <> | Subject | Re: [PATCH] Makefile: sort list of defconfig targets in make help output |
| |
On 2014-10-28 16:18, Konstantin Khlebnikov wrote: > Without sorting this list is completely unreadable for ARCH=arm.
Bump.
Just feel the difference. Before:
khlebnikov@buzz:~/src/linux-arm$ make ARCH=arm help Cleaning targets: clean - Remove most generated files but keep the config and enough build support to build external modules mrproper - Remove all generated files + config + various backup files distclean - mrproper + remove editor backup and patch files
Configuration targets: config - Update current config utilising a line-oriented program nconfig - Update current config utilising a ncurses menu based program menuconfig - Update current config utilising a menu based program xconfig - Update current config utilising a QT based front-end gconfig - Update current config utilising a GTK based front-end oldconfig - Update current config utilising a provided .config as base localmodconfig - Update current config disabling modules not loaded localyesconfig - Update current config converting local mods to core silentoldconfig - Same as oldconfig, but quietly, additionally update deps defconfig - New config with default from ARCH supplied defconfig savedefconfig - Save current config as ./defconfig (minimal config) allnoconfig - New config where all options are answered with no allyesconfig - New config where all options are accepted with yes allmodconfig - New config selecting modules when possible alldefconfig - New config with all symbols set to default randconfig - New config with random answer to all options listnewconfig - List new options olddefconfig - Same as silentoldconfig but sets new symbols to their default value kvmconfig - Enable additional options for guest kernel support tinyconfig - Configure the tiniest possible kernel
Other generic targets: all - Build all targets marked with [*] * vmlinux - Build the bare kernel * modules - Build all modules modules_install - Install all modules to INSTALL_MOD_PATH (default: /) firmware_install- Install all firmware to INSTALL_FW_PATH (default: $(INSTALL_MOD_PATH)/lib/firmware) dir/ - Build all files in dir and below dir/file.[oisS] - Build specified target only dir/file.lst - Build specified mixed source/assembly target only (requires a recent binutils and recent build (System.map)) dir/file.ko - Build module including final link modules_prepare - Set up for building external modules tags/TAGS - Generate tags file for editors cscope - Generate cscope index gtags - Generate GNU GLOBAL index kernelrelease - Output the release version string (use with make -s) kernelversion - Output the version stored in Makefile (use with make -s) image_name - Output the image name (use with make -s) headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH (default: ./usr)
Static analysers checkstack - Generate a list of stack hogs namespacecheck - Name space analysis on compiled kernel versioncheck - Sanity check on version.h usage includecheck - Check for duplicate included header files export_report - List the usages of all exported symbols headers_check - Sanity check on exported headers headerdep - Detect inclusion cycles in headers coccicheck - Check with Coccinelle.
Kernel selftest kselftest - Build and run kernel selftest (run as root) Build, install, and boot kernel before running kselftest on it
Kernel packaging: rpm-pkg - Build both source and binary RPM kernel packages binrpm-pkg - Build only the binary kernel package deb-pkg - Build the kernel as a deb package tar-pkg - Build the kernel as an uncompressed tarball targz-pkg - Build the kernel as a gzip compressed tarball tarbz2-pkg - Build the kernel as a bzip2 compressed tarball tarxz-pkg - Build the kernel as a xz compressed tarball perf-tar-src-pkg - Build perf-3.18.0-rc5.tar source tarball perf-targz-src-pkg - Build perf-3.18.0-rc5.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-3.18.0-rc5.tar.bz2 source tarball perf-tarxz-src-pkg - Build perf-3.18.0-rc5.tar.xz source tarball
Documentation targets: Linux kernel internal documentation in different formats: htmldocs - HTML pdfdocs - PDF psdocs - Postscript xmldocs - XML DocBook mandocs - man pages installmandocs - install man pages generated by mandocs cleandocs - clean all generated DocBook files
Architecture specific targets (arm): * zImage - Compressed kernel image (arch/arm/boot/zImage) Image - Uncompressed kernel image (arch/arm/boot/Image) * xipImage - XIP kernel image, if configured (arch/arm/boot/xipImage) uImage - U-Boot wrapped zImage bootpImage - Combined zImage and initial RAM disk (supply initrd image via make variable INITRD=<path>) * dtbs - Build device tree blobs for enabled boards dtbs_install - Install dtbs to /boot/dtbs/ install - Install uncompressed kernel zinstall - Install compressed kernel uinstall - Install U-Boot wrapped compressed kernel Install using (your) ~/bin/installkernel or (distribution) /sbin/installkernel or install to $(INSTALL_PATH) and run lilo
axm55xx_defconfig - Build for axm55xx at91sam9261_9g10_defconfig - Build for at91sam9261_9g10 clps711x_defconfig - Build for clps711x mainstone_defconfig - Build for mainstone mini2440_defconfig - Build for mini2440 koelsch_defconfig - Build for koelsch at91x40_defconfig - Build for at91x40 lpd270_defconfig - Build for lpd270 sunxi_defconfig - Build for sunxi nuc910_defconfig - Build for nuc910 mmp2_defconfig - Build for mmp2 integrator_defconfig - Build for integrator mackerel_defconfig - Build for mackerel vexpress_defconfig - Build for vexpress at91sam9rl_defconfig - Build for at91sam9rl trizeps4_defconfig - Build for trizeps4 cm_x300_defconfig - Build for cm_x300 multi_v7_defconfig - Build for multi_v7 prima2_defconfig - Build for prima2 omap1_defconfig - Build for omap1 cm_x2xx_defconfig - Build for cm_x2xx hisi_defconfig - Build for hisi keystone_defconfig - Build for keystone em_x270_defconfig - Build for em_x270 collie_defconfig - Build for collie pleb_defconfig - Build for pleb cns3420vb_defconfig - Build for cns3420vb netx_defconfig - Build for netx palmz72_defconfig - Build for palmz72 eseries_pxa_defconfig - Build for eseries_pxa u300_defconfig - Build for u300 badge4_defconfig - Build for badge4 spitz_defconfig - Build for spitz s5pv210_defconfig - Build for s5pv210 davinci_all_defconfig - Build for davinci_all ezx_defconfig - Build for ezx jornada720_defconfig - Build for jornada720 viper_defconfig - Build for viper imote2_defconfig - Build for imote2 pxa3xx_defconfig - Build for pxa3xx am200epdkit_defconfig - Build for am200epdkit pxa168_defconfig - Build for pxa168 cerfcube_defconfig - Build for cerfcube shmobile_defconfig - Build for shmobile colibri_pxa300_defconfig - Build for colibri_pxa300 bcm2835_defconfig - Build for bcm2835 zeus_defconfig - Build for zeus multi_v5_defconfig - Build for multi_v5 ebsa110_defconfig - Build for ebsa110 nuc960_defconfig - Build for nuc960 bockw_defconfig - Build for bockw at91sam9260_9g20_defconfig - Build for at91sam9260_9g20 iop13xx_defconfig - Build for iop13xx tct_hammer_defconfig - Build for tct_hammer dove_defconfig - Build for dove shannon_defconfig - Build for shannon lager_defconfig - Build for lager colibri_pxa270_defconfig - Build for colibri_pxa270 vt8500_v6_v7_defconfig - Build for vt8500_v6_v7 raumfeld_defconfig - Build for raumfeld mxs_defconfig - Build for mxs nuc950_defconfig - Build for nuc950 corgi_defconfig - Build for corgi iop32x_defconfig - Build for iop32x footbridge_defconfig - Build for footbridge rpc_defconfig - Build for rpc s3c6400_defconfig - Build for s3c6400 sama5_defconfig - Build for sama5 at91_dt_defconfig - Build for at91_dt pcm027_defconfig - Build for pcm027 pxa910_defconfig - Build for pxa910 mv78xx0_defconfig - Build for mv78xx0 realview_defconfig - Build for realview ks8695_defconfig - Build for ks8695 ape6evm_defconfig - Build for ape6evm imx_v4_v5_defconfig - Build for imx_v4_v5 armadillo800eva_defconfig - Build for armadillo800eva marzen_defconfig - Build for marzen lpc32xx_defconfig - Build for lpc32xx assabet_defconfig - Build for assabet kzm9g_defconfig - Build for kzm9g h5000_defconfig - Build for h5000 mvebu_v7_defconfig - Build for mvebu_v7 lubbock_defconfig - Build for lubbock nhk8815_defconfig - Build for nhk8815 at91rm9200_defconfig - Build for at91rm9200 netwinder_defconfig - Build for netwinder qcom_defconfig - Build for qcom iop33x_defconfig - Build for iop33x xcep_defconfig - Build for xcep efm32_defconfig - Build for efm32 tegra_defconfig - Build for tegra realview-smp_defconfig - Build for realview-smp orion5x_defconfig - Build for orion5x acs5k_defconfig - Build for acs5k ixp4xx_defconfig - Build for ixp4xx at91sam9263_defconfig - Build for at91sam9263 s3c2410_defconfig - Build for s3c2410 magician_defconfig - Build for magician acs5k_tiny_defconfig - Build for acs5k_tiny socfpga_defconfig - Build for socfpga moxart_defconfig - Build for moxart hackkit_defconfig - Build for hackkit msm_defconfig - Build for msm h3600_defconfig - Build for h3600 u8500_defconfig - Build for u8500 imx_v6_v7_defconfig - Build for imx_v6_v7 at91sam9g45_defconfig - Build for at91sam9g45 simpad_defconfig - Build for simpad versatile_defconfig - Build for versatile exynos_defconfig - Build for exynos spear13xx_defconfig - Build for spear13xx omap2plus_defconfig - Build for omap2plus mvebu_v5_defconfig - Build for mvebu_v5 bcm_defconfig - Build for bcm spear3xx_defconfig - Build for spear3xx lart_defconfig - Build for lart pxa255-idp_defconfig - Build for pxa255-idp neponset_defconfig - Build for neponset ep93xx_defconfig - Build for ep93xx spear6xx_defconfig - Build for spear6xx
make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build make V=2 [targets] 2 => give reason for rebuild of target make O=dir [targets] Locate all output files in "dir", including .config make C=1 [targets] Check all c source with $CHECK (sparse by default) make C=2 [targets] Force check of all c source with $CHECK make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections make W=n [targets] Enable extra gcc checks, n=1,2,3 where 1: warnings which may be relevant and do not occur too often 2: warnings which occur quite often but may still be relevant 3: more obscure warnings, can most likely be ignored Multiple levels can be combined with W=12 or W=123
Execute "make" or "make all" to build all targets marked with [*] For further info see the ./README file
After:
khlebnikov@buzz:~/src/linux-arm$ make ARCH=arm help Cleaning targets: clean - Remove most generated files but keep the config and enough build support to build external modules mrproper - Remove all generated files + config + various backup files distclean - mrproper + remove editor backup and patch files
Configuration targets: config - Update current config utilising a line-oriented program nconfig - Update current config utilising a ncurses menu based program menuconfig - Update current config utilising a menu based program xconfig - Update current config utilising a QT based front-end gconfig - Update current config utilising a GTK based front-end oldconfig - Update current config utilising a provided .config as base localmodconfig - Update current config disabling modules not loaded localyesconfig - Update current config converting local mods to core silentoldconfig - Same as oldconfig, but quietly, additionally update deps defconfig - New config with default from ARCH supplied defconfig savedefconfig - Save current config as ./defconfig (minimal config) allnoconfig - New config where all options are answered with no allyesconfig - New config where all options are accepted with yes allmodconfig - New config selecting modules when possible alldefconfig - New config with all symbols set to default randconfig - New config with random answer to all options listnewconfig - List new options olddefconfig - Same as silentoldconfig but sets new symbols to their default value kvmconfig - Enable additional options for guest kernel support tinyconfig - Configure the tiniest possible kernel
Other generic targets: all - Build all targets marked with [*] * vmlinux - Build the bare kernel * modules - Build all modules modules_install - Install all modules to INSTALL_MOD_PATH (default: /) firmware_install- Install all firmware to INSTALL_FW_PATH (default: $(INSTALL_MOD_PATH)/lib/firmware) dir/ - Build all files in dir and below dir/file.[oisS] - Build specified target only dir/file.lst - Build specified mixed source/assembly target only (requires a recent binutils and recent build (System.map)) dir/file.ko - Build module including final link modules_prepare - Set up for building external modules tags/TAGS - Generate tags file for editors cscope - Generate cscope index gtags - Generate GNU GLOBAL index kernelrelease - Output the release version string (use with make -s) kernelversion - Output the version stored in Makefile (use with make -s) image_name - Output the image name (use with make -s) headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH (default: ./usr)
Static analysers checkstack - Generate a list of stack hogs namespacecheck - Name space analysis on compiled kernel versioncheck - Sanity check on version.h usage includecheck - Check for duplicate included header files export_report - List the usages of all exported symbols headers_check - Sanity check on exported headers headerdep - Detect inclusion cycles in headers coccicheck - Check with Coccinelle.
Kernel selftest kselftest - Build and run kernel selftest (run as root) Build, install, and boot kernel before running kselftest on it
Kernel packaging: rpm-pkg - Build both source and binary RPM kernel packages binrpm-pkg - Build only the binary kernel package deb-pkg - Build the kernel as a deb package tar-pkg - Build the kernel as an uncompressed tarball targz-pkg - Build the kernel as a gzip compressed tarball tarbz2-pkg - Build the kernel as a bzip2 compressed tarball tarxz-pkg - Build the kernel as a xz compressed tarball perf-tar-src-pkg - Build perf-3.18.0-rc5.tar source tarball perf-targz-src-pkg - Build perf-3.18.0-rc5.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-3.18.0-rc5.tar.bz2 source tarball perf-tarxz-src-pkg - Build perf-3.18.0-rc5.tar.xz source tarball
Documentation targets: Linux kernel internal documentation in different formats: htmldocs - HTML pdfdocs - PDF psdocs - Postscript xmldocs - XML DocBook mandocs - man pages installmandocs - install man pages generated by mandocs cleandocs - clean all generated DocBook files
Architecture specific targets (arm): * zImage - Compressed kernel image (arch/arm/boot/zImage) Image - Uncompressed kernel image (arch/arm/boot/Image) * xipImage - XIP kernel image, if configured (arch/arm/boot/xipImage) uImage - U-Boot wrapped zImage bootpImage - Combined zImage and initial RAM disk (supply initrd image via make variable INITRD=<path>) * dtbs - Build device tree blobs for enabled boards dtbs_install - Install dtbs to /boot/dtbs/ install - Install uncompressed kernel zinstall - Install compressed kernel uinstall - Install U-Boot wrapped compressed kernel Install using (your) ~/bin/installkernel or (distribution) /sbin/installkernel or install to $(INSTALL_PATH) and run lilo
acs5k_defconfig - Build for acs5k acs5k_tiny_defconfig - Build for acs5k_tiny am200epdkit_defconfig - Build for am200epdkit ape6evm_defconfig - Build for ape6evm armadillo800eva_defconfig - Build for armadillo800eva assabet_defconfig - Build for assabet at91_dt_defconfig - Build for at91_dt at91rm9200_defconfig - Build for at91rm9200 at91sam9260_9g20_defconfig - Build for at91sam9260_9g20 at91sam9261_9g10_defconfig - Build for at91sam9261_9g10 at91sam9263_defconfig - Build for at91sam9263 at91sam9g45_defconfig - Build for at91sam9g45 at91sam9rl_defconfig - Build for at91sam9rl at91x40_defconfig - Build for at91x40 axm55xx_defconfig - Build for axm55xx badge4_defconfig - Build for badge4 bcm2835_defconfig - Build for bcm2835 bcm_defconfig - Build for bcm bockw_defconfig - Build for bockw cerfcube_defconfig - Build for cerfcube clps711x_defconfig - Build for clps711x cm_x2xx_defconfig - Build for cm_x2xx cm_x300_defconfig - Build for cm_x300 cns3420vb_defconfig - Build for cns3420vb colibri_pxa270_defconfig - Build for colibri_pxa270 colibri_pxa300_defconfig - Build for colibri_pxa300 collie_defconfig - Build for collie corgi_defconfig - Build for corgi davinci_all_defconfig - Build for davinci_all dove_defconfig - Build for dove ebsa110_defconfig - Build for ebsa110 efm32_defconfig - Build for efm32 em_x270_defconfig - Build for em_x270 ep93xx_defconfig - Build for ep93xx eseries_pxa_defconfig - Build for eseries_pxa exynos_defconfig - Build for exynos ezx_defconfig - Build for ezx footbridge_defconfig - Build for footbridge h3600_defconfig - Build for h3600 h5000_defconfig - Build for h5000 hackkit_defconfig - Build for hackkit hisi_defconfig - Build for hisi imote2_defconfig - Build for imote2 imx_v4_v5_defconfig - Build for imx_v4_v5 imx_v6_v7_defconfig - Build for imx_v6_v7 integrator_defconfig - Build for integrator iop13xx_defconfig - Build for iop13xx iop32x_defconfig - Build for iop32x iop33x_defconfig - Build for iop33x ixp4xx_defconfig - Build for ixp4xx jornada720_defconfig - Build for jornada720 keystone_defconfig - Build for keystone koelsch_defconfig - Build for koelsch ks8695_defconfig - Build for ks8695 kzm9g_defconfig - Build for kzm9g lager_defconfig - Build for lager lart_defconfig - Build for lart lpc32xx_defconfig - Build for lpc32xx lpd270_defconfig - Build for lpd270 lubbock_defconfig - Build for lubbock mackerel_defconfig - Build for mackerel magician_defconfig - Build for magician mainstone_defconfig - Build for mainstone marzen_defconfig - Build for marzen mini2440_defconfig - Build for mini2440 mmp2_defconfig - Build for mmp2 moxart_defconfig - Build for moxart msm_defconfig - Build for msm multi_v5_defconfig - Build for multi_v5 multi_v7_defconfig - Build for multi_v7 mv78xx0_defconfig - Build for mv78xx0 mvebu_v5_defconfig - Build for mvebu_v5 mvebu_v7_defconfig - Build for mvebu_v7 mxs_defconfig - Build for mxs neponset_defconfig - Build for neponset netwinder_defconfig - Build for netwinder netx_defconfig - Build for netx nhk8815_defconfig - Build for nhk8815 nuc910_defconfig - Build for nuc910 nuc950_defconfig - Build for nuc950 nuc960_defconfig - Build for nuc960 omap1_defconfig - Build for omap1 omap2plus_defconfig - Build for omap2plus orion5x_defconfig - Build for orion5x palmz72_defconfig - Build for palmz72 pcm027_defconfig - Build for pcm027 pleb_defconfig - Build for pleb prima2_defconfig - Build for prima2 pxa168_defconfig - Build for pxa168 pxa255-idp_defconfig - Build for pxa255-idp pxa3xx_defconfig - Build for pxa3xx pxa910_defconfig - Build for pxa910 qcom_defconfig - Build for qcom raumfeld_defconfig - Build for raumfeld realview-smp_defconfig - Build for realview-smp realview_defconfig - Build for realview rpc_defconfig - Build for rpc s3c2410_defconfig - Build for s3c2410 s3c6400_defconfig - Build for s3c6400 s5pv210_defconfig - Build for s5pv210 sama5_defconfig - Build for sama5 shannon_defconfig - Build for shannon shmobile_defconfig - Build for shmobile simpad_defconfig - Build for simpad socfpga_defconfig - Build for socfpga spear13xx_defconfig - Build for spear13xx spear3xx_defconfig - Build for spear3xx spear6xx_defconfig - Build for spear6xx spitz_defconfig - Build for spitz sunxi_defconfig - Build for sunxi tct_hammer_defconfig - Build for tct_hammer tegra_defconfig - Build for tegra trizeps4_defconfig - Build for trizeps4 u300_defconfig - Build for u300 u8500_defconfig - Build for u8500 versatile_defconfig - Build for versatile vexpress_defconfig - Build for vexpress viper_defconfig - Build for viper vt8500_v6_v7_defconfig - Build for vt8500_v6_v7 xcep_defconfig - Build for xcep zeus_defconfig - Build for zeus
make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build make V=2 [targets] 2 => give reason for rebuild of target make O=dir [targets] Locate all output files in "dir", including .config make C=1 [targets] Check all c source with $CHECK (sparse by default) make C=2 [targets] Force check of all c source with $CHECK make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections make W=n [targets] Enable extra gcc checks, n=1,2,3 where 1: warnings which may be relevant and do not occur too often 2: warnings which occur quite often but may still be relevant 3: more obscure warnings, can most likely be ignored Multiple levels can be combined with W=12 or W=123
Execute "make" or "make all" to build all targets marked with [*] For further info see the ./README file
> > Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> > --- > Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Makefile b/Makefile > index 52c1297..63f05dc 100644 > --- a/Makefile > +++ b/Makefile > @@ -1234,7 +1234,7 @@ rpm: include/config/kernel.release FORCE > # --------------------------------------------------------------------------- > > boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) > -boards := $(notdir $(boards)) > +boards := $(sort $(notdir $(boards))) > board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) > board-dirs := $(sort $(notdir $(board-dirs:/=))) > > >
| |