lkml.org 
[lkml]   [2014]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/4] Touchscreen performance related fixes
Hi,

On Thursday 13 November 2014 05:53 PM, Vignesh R wrote:
> Hi,
>
> On Wednesday 12 November 2014 06:30 PM, Johannes Pointner wrote:
>> Hello Vignesh,
>>
>> I tried your patch version 3 on a customized board and had some
>> behavior I couldn't explain.
>> If I only use the touchscreen it works fine but if I also read values
>> from the ADCs then I get a lot of pen_up events even if I am still
>> touching the screen.
>> For the test I read via
>> # cat /sys/bus/iio/devices/iio\:device0/in_voltage5_raw
>> values from the ADC in an busy loop as you explained in an email
>> before. Did you also experience such behavior or do you know what
>> causes it?
>
> Thanks for testing. I was able to fix this issue. Will post version 4
> shortly.
>

Were you able to test the v4 patch series on your board? Is the issue fixed?

> Regards
> Vignesh
>
>>
>> Without the patches the touchscreen works fine during the iio test.
>>
>> Thanks,
>> Hannes
>>
>> 2014-11-06 8:42 GMT+01:00 Vignesh R <vigneshr@ti.com>:
>>>
>>>
>>> On Monday 03 November 2014 11:39 PM, Richard Cochran wrote:
>>>> On Mon, Oct 27, 2014 at 04:38:27PM +0530, Vignesh R wrote:
>>>>> This series of patches fix TSC defects related to lag in touchscreen
>>>>> performance and cursor jump at touch release. The lag was result of
>>>>> udelay in TSC interrupt handler. Cursor jump due to false pen-up event.
>>>>> The patches implement Advisory 1.0.31 in silicon errata of am335x-evm
>>>>> to avoid false pen-up events and remove udelay.
>>>>
>>>> That advisory has two workarounds. You have chosen the second one?
>>>
>>> Work around one. Hence 5 wire design is not broken.
>>>
>>>>
>>>> The text of the second workaround says it only works on 4 wire setups,
>>>> so I wonder how 5 wire designs will be affected.
>>>>
>>>>> The advisory says to use
>>>>> steps 1 to 4 for ADC and 5 to 16 for TSC (assuming 4 wire TSC and 4 channel
>>>>> ADC).
>>>>
>>>> No, it doesn't say that. (sprz360f.pdf)
>>>
>>> The pen up event detection happens immediately after charge step. Hence,
>>> interchanging ADC and TSC steps makes sure that sampling of touch
>>> co-ordinates and pen events are done one after the other. This
>>> workaround was suggested by internal hardware folks. Earlier ADC steps
>>> intervened between sampling of co-ordinates and pen event detection
>>> which is not desirable.
>>>
>>>>
>>>>> Further the X co-ordinate must be the last one to be sampled just
>>>>> before charge step. The first two patches implement the required changes.
>>>>
>>>> FWIW, I implemented the first workaround and removed the udelay not
>>>> too long ago. Like Sebastian, I saw the TSC unit hang after about
>>>> 50000 interrupts when running with the workaround.
>>>>
>>>> Did you test you patch for very long?
>>>
>>> Yes, I tested for about 200000 interrupts and I didn't see any hang.
>>> This patch series does not just implement workaround but also does some
>>> minor changes, such as interchanging ADC and TSC steps etc, which makes
>>> TSC driver more robust. Let me know if you encounter any issues with my
>>> patch series.
>>>
>>> Regards
>>> Vignesh
>>>
>>>>
>>>> Thanks,
>>>> Richard
>>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>


\
 
 \ /
  Last update: 2014-11-17 13:21    [W:0.062 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site