lkml.org 
[lkml]   [2014]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: rockchip: fix clock select order for usbphy480m_src
Date
According to rk3288 trm, the mux selector locate at bit[12:11]
of CRU_CLKSEL13_CON shows:
2'b00: select HOST0 USB pll clock (clk_otgphy1)
2'b01: select HOST1 USB pll clock (clk_otgphy2)
2'b10: select OTG USB pll clock (clk_otgphy0)

The clock map is in Fig. 3-4 CRU Clock Architecture Diagram 3
- clk_otgphy0 -> USB PHY OTG
- clk_otgphy1 -> USB PHY host0
- clk_otgphy2 -> USB PHY host1

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

drivers/clk/rockchip/clk-rk3288.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 157b60b..4d70518 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -195,8 +195,8 @@ PNAME(mux_hsadcout_p) = { "hsadc_src", "ext_hsadc" };
PNAME(mux_edp_24m_p) = { "ext_edp_24m", "xin24m" };
PNAME(mux_tspout_p) = { "cpll", "gpll", "npll", "xin27m" };

-PNAME(mux_usbphy480m_p) = { "sclk_otgphy0", "sclk_otgphy1",
- "sclk_otgphy2" };
+PNAME(mux_usbphy480m_p) = { "sclk_otgphy1", "sclk_otgphy2",
+ "sclk_otgphy0" };
PNAME(mux_hsicphy480m_p) = { "cpll", "gpll", "usbphy480m_src" };
PNAME(mux_hsicphy12m_p) = { "hsicphy12m_xin12m", "hsicphy12m_usbphy" };

--
1.9.1


\
 
 \ /
  Last update: 2014-11-13 09:41    [W:0.028 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site