lkml.org 
[lkml]   [2014]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 1/4] ARM: KVM: on unhandled IO mem abort, route the call to the KVM MMIO bus
Hi Nikolay,

On 13/11/14 12:29, Nikolay Nikolaev wrote:
> On Thu, Nov 13, 2014 at 1:52 PM, Andre Przywara <andre.przywara@arm.com> wrote:
>> Hi Nikolay,
>>
>> On 13/11/14 11:37, Marc Zyngier wrote:
>>> [fixing Andre's email address]
>>>
>>> On 13/11/14 11:20, Christoffer Dall wrote:
>>>> On Thu, Nov 13, 2014 at 12:45:42PM +0200, Nikolay Nikolaev wrote:
>>>>
>>>> [...]
>>>>
>>>>>>>
>>>>>>> Going through the vgic_handle_mmio we see that it will require large
>>>>>>> refactoring:
>>>>>>> - there are 15 MMIO ranges for the vgic now - each should be
>>>>>>> registered as a separate device
>>>>>>> - the handler of each range should be split into read and write
>>>>>>> - all handlers take 'struct kvm_exit_mmio', and pass it to
>>>>>>> 'vgic_reg_access', 'mmio_data_read' and 'mmio_data_read'
>>>>>>>
>>>>>>> To sum up - if we do this refactoring of vgic's MMIO handling +
>>>>>>> kvm_io_bus_ API getting 'vcpu" argument we'll get a 'much' cleaner
>>>>>>> vgic code and as a bonus we'll get 'ioeventfd' capabilities.
>>>>>>>
>>>>>>> We have 3 questions:
>>>>>>> - is the kvm_io_bus_ getting 'vcpu' argument acceptable for the other
>>>>>>> architectures too?
>>>>>>> - is this huge vgic MMIO handling redesign acceptable/desired (it
>>>>>>> touches a lot of code)?
>>>>>>> - is there a way that ioeventfd is accepted leaving vgic.c in it's
>>>>>>> current state?
>>>>>>>
>>>>>> Not sure how the latter question is relevant to this, but check with
>>>>>> Andre who recently looked at this as well and decided that for GICv3 the
>>>>>> only sane thing was to remove that comment for the gic.
>>>>> @Andre - what's your experience with the GICv3 and MMIO handling,
>>>>> anything specific?
>>>>>>
>>>>>> I don't recall the details of what you were trying to accomplish here
>>>>>> (it's been 8 months or so) but the surely the vgic handling code should
>>>>>> *somehow* be integrated into the handle_kernel_mmio (like Paolo
>>>>>> suggested), unless you come back and tell me that that would involve a
>>>>>> complete rewrite of the vgic code.
>>>>> I'm experimenting now - it's not exactly rewrite of whole vgic code,
>>>>> but it will touch a lot of it - all MMIO access handlers and the
>>>>> supporting functions.
>>>>> We're ready to spend the effort. My question is - is this acceptable?
>>>>>
>>>> I certainly appreciate the offer to do this work, but it's hard to say
>>>> at this point if it is worth it.
>>>>
>>>> What I was trying to say above is that Andre looked at this, and came to
>>>> the conclusion that it is not worth it.
>>>>
>>>> Marc, what are your thoughts?
>>>
>>> Same here, I rely on Andre's view that it was not very useful. Now, it
>>> would be good to see a mock-up of the patches and find out:
>>
>> Seconded, can you send a pointer to the VGIC rework patches mentioned?
> They are still in WiP state - not exactly working. I'm still exploring
> what the status is.
>
> Our major target is having ioeventfd suport in ARM. For this we need
> to support kvm_io_bus_ mechanisms for MMIO access (cause ioevent fd
> device is registered this way). Then this subject of integrating vgic
> with the kvm_io_bus_ APIs came up.
> My personal opinion - they should be able to coexist in peace.
>
>>
>>> - if it is a major improvement for the general quality of the code
>>> - if that allow us to *delete* a lot of code (if it is just churn, I'm
>>> not really interested)
>>> - if it helps or hinders further developments that are currently in the
>>> pipeline
>>>
>>> Andre, can you please share your findings? I don't remember the
>>> specifics of the discussion we had a few months ago...
>>
>> 1) Given the date in the reply I sense that your patches are from March
>> this year or earlier. So this is based on VGIC code from March, which
>> predates Marc's vgic_dyn changes that just went in 3.18-rc1? His patches
>> introduced another member to struct mmio_range to check validity of
>> accesses with a reduced number of SPIs supported (.bits_per_irq).
>> So is this covered in your rework?
> Still no (rebased to 3.17) - didn't see it, but should not be an issue.
>>
>> 2)
>>>>> - there are 15 MMIO ranges for the vgic now - each should be
>>
>> Well, the GICv3 emulation adds 41 new ranges. Not sure if this still fits.
>>
>>>>> registered as a separate device
>>
>> I found this fact a show-stopper when looking at this a month ago.
>> Somehow it feels wrong to register a bunch of pseudo-devices. I could go
>> with registering a small number of regions (one distributor, two
>> redistributor regions for instance), but not handling every single of
>> the 41 + 15 register "groups" as a device.
> Do you sense performance issues, or just "it's not right"?

Just "not right", since they are no 15 devices for a GICv2 emulation.

> Maybe kvm_io_bus_ needs some extesion to hanlde a device with multiple regions?

Well, maybe a simple rename could fix this, but I am not sure it still
fits then. I am just afraid we end up with quite some code duplication
in each handler function. Also if we needed to split-up read and write
this ends up with much more code. Currently this is cleverly handled in
one function without looking messy (great job, Marc, btw!)

Also handling private GICv3 interrupts is no longer done via a single
MMIO offset banked by the accessing (v)CPU, but by per-CPU MMIO regions.
Would we need to register separate devices for each VCPU then?
Which would multiply the 41 "devices" by the number of VCPUs?

>> Also I wasn't sure if we had to expose some of the vGIC structures to
>> the other KVM code layers.
> I don't see such a need. Can you point some example?

No, was just a feeling. Currently we are happily confined to
virt/kvm/arm and the interface to the generic and arch KVM code is
pretty small. I was just afraid that would have to be extended. But if
you say it's fine, then it's fine.

>> But I am open to any suggestions (as long as they go in _after_ my
>> vGICv3 series ;-) - so looking forward to some repo to see how it looks
>> like.
> There is still nothing much to show - but if there is interest we may
> prepare something that shows the idea.

Yeah, just some dump of the vgic.c would suffice. Or maybe even an
example implementation of one or two registers to see how it compares to
the current code.

I just get the feeling that GICv2 emulation would be fine with this
refactoring, but it wouldn't fit anymore for GICv3 without hacks.

> BTW, where is your repo (sorry I don't follow so close) with the vGICv3?

It's on: http://www.linux-arm.org/git?p=linux-ap.git
Check the latest kvm-gicv3 branch.

Thanks,
Andre.


\
 
 \ /
  Last update: 2014-11-13 14:21    [W:0.068 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site