lkml.org 
[lkml]   [2014]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/3] add power off driver for i.mx6
Thanks, Shawn.
On Wed, Nov 12, 2014 at 06:56:22PM +0800, Shawn Guo wrote:
> On Wed, Nov 12, 2014 at 04:20:36PM +0800, Robin Gong wrote:
> > Resend the patchset with the latest MAINTAINERS
> > Add simple power off driver for i.mx6, including:
> > - add basic imx-snvs-poweroff driver in drivers/power/reset
> > - add device node in all dts files of i.mx6.
> > - enable in config file
> >
> > Change from v3:
> > - disable poweroff driver in soc level dts and enable it in board level dts
> > - replace 'EIO' with 'ENODEV' while of_iomap fail.
> > Change from v2:
> > - remove useless included head files
> > - split device binding doc from dts patch
> > - add description for the case that PMIC_ON_REQ not used as external power
> > control
> >
> > Robin Gong (3):
> > ARM: dts: imx6: add pm_power_off support for i.mx6 chips
> > power: reset: imx-snvs-poweroff: add power off driver for i.mx6
> > ARM: configs: imx_v6_v7_defconfig: add power off driver
>
> I'm fine with the series. But before I take the patches, I need an ACK
> from DT folks on the bindings.
>
> Shawn


\
 
 \ /
  Last update: 2014-11-13 03:41    [W:0.065 / U:3.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site