lkml.org 
[lkml]   [2014]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/9] net: phy: micrel: refactor led-mode error handling
Date
Refactor led-mode error handling.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/net/phy/micrel.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 1b3985cdc64c..ec9ce35e934b 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -179,14 +179,19 @@ static int kszphy_setup_led(struct phy_device *phydev,
}

temp = phy_read(phydev, reg);
- if (temp < 0)
- return temp;
+ if (temp < 0) {
+ rc = temp;
+ goto out;
+ }

temp &= ~(3 << shift);
temp |= val << shift;
rc = phy_write(phydev, reg, temp);
+out:
+ if (rc < 0)
+ dev_err(&phydev->dev, "failed to set led mode\n");

- return rc < 0 ? rc : 0;
+ return rc;
}

/* Disable PHY address 0 as the broadcast address, so that it can be used as a
@@ -223,9 +228,7 @@ static int ksz8021_config_init(struct phy_device *phydev)
{
int rc;

- rc = kszphy_setup_led(phydev, 0x1f, 4);
- if (rc)
- dev_err(&phydev->dev, "failed to set led mode\n");
+ kszphy_setup_led(phydev, 0x1f, 4);

rc = ksz_config_flags(phydev);
if (rc < 0)
@@ -240,9 +243,7 @@ static int ks8051_config_init(struct phy_device *phydev)
{
int rc;

- rc = kszphy_setup_led(phydev, 0x1f, 4);
- if (rc)
- dev_err(&phydev->dev, "failed to set led mode\n");
+ kszphy_setup_led(phydev, 0x1f, 4);

rc = ksz_config_flags(phydev);
return rc < 0 ? rc : 0;
--
2.0.4


\
 
 \ /
  Last update: 2014-11-11 20:41    [W:0.133 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site