lkml.org 
[lkml]   [2014]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv7 4/8] usb: dwc2: Initialize the USB core for peripheral mode
Date
From: Dinh Nguyen <dinguyen@opensource.altera.com>

Initialize the USB driver to peripheral mode when a B-Device connector
is attached.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
---
v7: s3c_hsotg_core_init became s3c_hsotg_core_init_disconnected
v5: move the export of s3c_hsotg_core_init into this patch
---
drivers/usb/dwc2/core.h | 4 ++++
drivers/usb/dwc2/gadget.c | 4 ++--
drivers/usb/dwc2/hcd.c | 2 ++
3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 4905d88..4710935 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -966,6 +966,8 @@ extern int s3c_hsotg_remove(struct dwc2_hsotg *hsotg);
extern int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2);
extern int s3c_hsotg_resume(struct dwc2_hsotg *dwc2);
extern int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq);
+extern void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2);
+extern void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg);
#else
static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2)
{ return 0; }
@@ -975,6 +977,8 @@ static inline int s3c_hsotg_resume(struct dwc2_hsotg *dwc2)
{ return 0; }
static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
{ return 0; }
+static inline void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2) {}
+static inline void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
#endif

#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 9caea51..ec85340 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2125,7 +2125,7 @@ static int s3c_hsotg_corereset(struct dwc2_hsotg *hsotg)
*
* Issue a soft reset to the core, and await the core finishing it.
*/
-static void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg)
+void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg)
{
s3c_hsotg_corereset(hsotg);

@@ -2257,7 +2257,7 @@ static void s3c_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
__orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
}

-static void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg)
+void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg)
{
/* remove the soft-disconnect and let's go */
__bic32(hsotg->regs + DCTL, DCTL_SFTDISCON);
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 4a3cce0..fa60f4a 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1371,6 +1371,8 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
hsotg->op_state = OTG_STATE_B_PERIPHERAL;
dwc2_core_init(hsotg, false, -1);
dwc2_enable_global_interrupts(hsotg);
+ s3c_hsotg_core_init_disconnected(hsotg);
+ s3c_hsotg_core_connect(hsotg);
} else {
/* A-Device connector (Host Mode) */
dev_dbg(hsotg->dev, "connId A\n");
--
2.0.3


\
 
 \ /
  Last update: 2014-11-11 18:41    [W:0.100 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site