lkml.org 
[lkml]   [2014]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 1/2] mmc: core: use card->ocr when negotiating voltage setting in mmc_sdio_power_restore
As we are restoring power to a known card, it makes sense to use
the 'ocr' value known for the card rather than the generic one
for the host interface.
This matches the use of card->ocr passed to mmc_power_up in
mmc_sdio_runtime_resume (just before mmc_sdio_power_restore is
called), and the value passed to mmc_sdio_init_card() a little
later in mmc_sdio_power_restore().

Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/mmc/core/sdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index e636d9e99e4a..3c0f07961fab 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -1028,7 +1028,7 @@ static int mmc_sdio_power_restore(struct mmc_host *host)

sdio_reset(host);
mmc_go_idle(host);
- mmc_send_if_cond(host, host->ocr_avail);
+ mmc_send_if_cond(host, host->card->ocr);

ret = mmc_send_io_op_cond(host, 0, NULL);
if (ret)



\
 
 \ /
  Last update: 2014-11-12 05:41    [W:0.103 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site