lkml.org 
[lkml]   [2014]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mfd: tps65090: Fix bonkers indenting strategy
Date
First spotted pointless (incorrect) indent of 'if (ret)', then double
indentations of a struct attribute 'mask'. Decided to go through the
whole file and make amendments instead and this is the result.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/tps65090.c | 62 +++++++++++++++++++++++++-------------------------
1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
index 1c3e6e2..14b62e1 100644
--- a/drivers/mfd/tps65090.c
+++ b/drivers/mfd/tps65090.c
@@ -76,58 +76,58 @@ static struct mfd_cell tps65090s[] = {
static const struct regmap_irq tps65090_irqs[] = {
/* INT1 IRQs*/
[TPS65090_IRQ_VAC_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE,
},
[TPS65090_IRQ_VSYS_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE,
},
[TPS65090_IRQ_BAT_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE,
},
[TPS65090_IRQ_CHARGING_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE,
},
[TPS65090_IRQ_CHARGING_COMPLETE] = {
- .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE,
+ .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE,
},
[TPS65090_IRQ_OVERLOAD_DCDC1] = {
- .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1,
+ .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1,
},
[TPS65090_IRQ_OVERLOAD_DCDC2] = {
- .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2,
+ .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2,
},
/* INT2 IRQs*/
[TPS65090_IRQ_OVERLOAD_DCDC3] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3,
},
[TPS65090_IRQ_OVERLOAD_FET1] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET1,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET1,
},
[TPS65090_IRQ_OVERLOAD_FET2] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET2,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET2,
},
[TPS65090_IRQ_OVERLOAD_FET3] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET3,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET3,
},
[TPS65090_IRQ_OVERLOAD_FET4] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET4,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET4,
},
[TPS65090_IRQ_OVERLOAD_FET5] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET5,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET5,
},
[TPS65090_IRQ_OVERLOAD_FET6] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET6,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET6,
},
[TPS65090_IRQ_OVERLOAD_FET7] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET7,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET7,
},
};

@@ -176,7 +176,7 @@ MODULE_DEVICE_TABLE(of, tps65090_of_match);
#endif

static int tps65090_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
struct tps65090_platform_data *pdata = dev_get_platdata(&client->dev);
int irq_base = 0;
@@ -210,11 +210,11 @@ static int tps65090_i2c_probe(struct i2c_client *client,

if (client->irq) {
ret = regmap_add_irq_chip(tps65090->rmap, client->irq,
- IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base,
- &tps65090_irq_chip, &tps65090->irq_data);
- if (ret) {
- dev_err(&client->dev,
- "IRQ init failed with err: %d\n", ret);
+ IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base,
+ &tps65090_irq_chip, &tps65090->irq_data);
+ if (ret) {
+ dev_err(&client->dev,
+ "IRQ init failed with err: %d\n", ret);
return ret;
}
} else {
@@ -223,8 +223,8 @@ static int tps65090_i2c_probe(struct i2c_client *client,
}

ret = mfd_add_devices(tps65090->dev, -1, tps65090s,
- ARRAY_SIZE(tps65090s), NULL,
- 0, regmap_irq_get_domain(tps65090->irq_data));
+ ARRAY_SIZE(tps65090s), NULL,
+ 0, regmap_irq_get_domain(tps65090->irq_data));
if (ret) {
dev_err(&client->dev, "add mfd devices failed with err: %d\n",
ret);
--
1.9.1


\
 
 \ /
  Last update: 2014-11-10 14:01    [W:0.034 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site