lkml.org 
[lkml]   [2014]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 15/16] cxl: Add driver to Kbuild and Makefiles
Date
From: Ian Munsie <imunsie@au1.ibm.com>

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
drivers/misc/cxl/Kconfig | 17 +++++++++++++++++
drivers/misc/cxl/Makefile | 2 ++
2 files changed, 19 insertions(+)

diff --git a/drivers/misc/cxl/Kconfig b/drivers/misc/cxl/Kconfig
index 5cdd319..a990b39 100644
--- a/drivers/misc/cxl/Kconfig
+++ b/drivers/misc/cxl/Kconfig
@@ -6,3 +6,20 @@ config CXL_BASE
bool
default n
select PPC_COPRO_BASE
+
+config CXL
+ tristate "Support for IBM Coherent Accelerators (CXL)"
+ depends on PPC_POWERNV && PCI_MSI
+ select CXL_BASE
+ default m
+ help
+ Select this option to enable driver support for IBM Coherent
+ Accelerators (CXL). CXL is otherwise known as Coherent Accelerator
+ Processor Interface (CAPI). CAPI allows accelerators in FPGAs to be
+ coherently attached to a CPU via an MMU. This driver enables
+ userspace programs to access these accelerators via /dev/cxl/afuM.N
+ devices.
+
+ CAPI adapters are found in POWER8 based systems.
+
+ If unsure, say N.
diff --git a/drivers/misc/cxl/Makefile b/drivers/misc/cxl/Makefile
index e30ad0a..165e98f 100644
--- a/drivers/misc/cxl/Makefile
+++ b/drivers/misc/cxl/Makefile
@@ -1 +1,3 @@
+cxl-y += main.o file.o irq.o fault.o native.o context.o sysfs.o debugfs.o pci.o
+obj-$(CONFIG_CXL) += cxl.o
obj-$(CONFIG_CXL_BASE) += base.o
--
1.9.1


\
 
 \ /
  Last update: 2014-10-08 11:41    [W:0.208 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site