lkml.org 
[lkml]   [2014]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 09/20] usb: dwc3: add delay P1/P2/P3 quirk
Date
This patch adds delay P0 to P1/P2/P3 quirk for U2/U2/U3, and some special
platforms can configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
drivers/usb/dwc3/core.c | 6 ++++++
drivers/usb/dwc3/core.h | 5 +++++
drivers/usb/dwc3/platform_data.h | 1 +
4 files changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 9de11fd..a406bb5 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -22,6 +22,8 @@ Optional properties:
- snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
- snps,req_p1p2p3_quirk: when set, the core will always request for
P1/P2/P3 transition sequence.
+ - snps,del_p1p2p3_quirk: when set core will delay P1/P2/P3 until a certain
+ amount of 8B10B errors occur.

This is usually a subnode to DWC3 glue to which it is connected.

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index e951984..4429de7 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -380,6 +380,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->req_p1p2p3_quirk)
reg |= DWC3_GUSB3PIPECTL_REQP1P2P3;

+ if (dwc->del_p1p2p3_quirk)
+ reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN;
+
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);

mdelay(100);
@@ -758,6 +761,8 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,u2ss_inp3_quirk");
dwc->req_p1p2p3_quirk = of_property_read_bool(node,
"snps,req_p1p2p3_quirk");
+ dwc->del_p1p2p3_quirk = of_property_read_bool(node,
+ "snps,del_p1p2p3_quirk");
} else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
@@ -771,6 +776,7 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk;
dwc->u2ss_inp3_quirk = pdata->u2ss_inp3_quirk;
dwc->req_p1p2p3_quirk = pdata->req_p1p2p3_quirk;
+ dwc->del_p1p2p3_quirk = pdata->del_p1p2p3_quirk;
}

/* default to superspeed if no maximum_speed passed */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index cbb8593..750e473 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -178,6 +178,9 @@
#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
#define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29)
#define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24)
+#define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19)
+#define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7)
+#define DWC3_GUSB3PIPECTL_DEP1P2P3_EN DWC3_GUSB3PIPECTL_DEP1P2P3(1)
#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)

/* Global TX Fifo Size Register */
@@ -685,6 +688,7 @@ struct dwc3_scratchpad_array {
* @u2exit_lfps_quirk: set if we enable U2Exit LFPS quirk
* @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
* @req_p1p2p3_quirk: set if we enable request P1/P2/P3 quirk
+ * @del_p1p2p3_quirk: set if we enable delay P1/P2/P3 quirk
*/
struct dwc3 {
struct usb_ctrlrequest *ctrl_req;
@@ -796,6 +800,7 @@ struct dwc3 {
unsigned u2exit_lfps_quirk:1;
unsigned u2ss_inp3_quirk:1;
unsigned req_p1p2p3_quirk:1;
+ unsigned del_p1p2p3_quirk:1;
};

/* -------------------------------------------------------------------------- */
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index d3e6ec2..a421cec 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -32,4 +32,5 @@ struct dwc3_platform_data {
unsigned u2exit_lfps_quirk:1;
unsigned u2ss_inp3_quirk:1;
unsigned req_p1p2p3_quirk:1;
+ unsigned del_p1p2p3_quirk:1;
};
--
1.9.1


\
 
 \ /
  Last update: 2014-10-30 11:21    [W:0.500 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site