lkml.org 
[lkml]   [2014]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] thermal: core: fix: Initialize the max_state variable to 0
Hi Eduardo,

> Hello Lukasz,
>
> On Wed, Sep 24, 2014 at 10:27:11AM +0200, Lukasz Majewski wrote:
> > Pointer to the uninitialized max_state variable is passed to get the
> > maximal cooling state.
> > For CPU cooling device (cpu_cooling.c) the cpufreq_get_max_state()
> > is called, which even when error occurs will return the max_state
> > variable unchanged.
> > Since error for ->get_max_state() is not checked, the automatically
>
>
> Good that you added a fix in your series for this.
>
>
> > allocated value of max_state is used for (upper > max_state)
> > comparison. For any possible max_state value it is very unlikely
> > that it will be less than upper.
> > As a consequence, the cooling device is bind even without the backed
> > cpufreq table initialized.
> >
> > This initialization will prevent from accidental binding trip
> > points to cpu freq cooling frequencies when cpufreq driver itself
> > is not yet fully initialized.
>
> Although I agree with the fix, as long as we also include a check for
> the .get_max_state return value, I believe the problem you are
> describing is about initialization sequence.

As you pointed out - the problem here is with initialization sequence.
Thermal and cpufreq cores are initialized very early.

However, the get_max_state() for cpu_cooling.c device (as it is the
pervasive way of cooling things) accesses cpufreq policy to get the
freq_table and count available states.

The issue here is with late initialization of cpufreq policy.

Up till now the cpu_cooling device was bind even when the
get_max_state() returned -EINVAL and everything worked after late
cpufreq policy initialization. However, during this time window the
thermal driver is not configured.

>
> In general, I believe we need a better
> sequencing between thermal and cpufreq subsystems. One way out is to
> include a check for cpufreq driver in the thermal driver, and return
> -EPROBE_DEFER when cpufreq is not ready.

I think that we could return -EPROBE_DEFER when cpufreq's policy is not
yet available and subscribe to cpufreq notifier to call
bind_cooling_device then.

Let's wait for Zhang opinion since he looks after the thermal core code.

>
> >
> > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> > ---
> > drivers/thermal/thermal_core.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/thermal/thermal_core.c
> > b/drivers/thermal/thermal_core.c index 454884a..747618a 100644
> > --- a/drivers/thermal/thermal_core.c
> > +++ b/drivers/thermal/thermal_core.c
> > @@ -927,7 +927,7 @@ int thermal_zone_bind_cooling_device(struct
> > thermal_zone_device *tz, struct thermal_instance *pos;
> > struct thermal_zone_device *pos1;
> > struct thermal_cooling_device *pos2;
> > - unsigned long max_state;
> > + unsigned long max_state = 0;
> > int result;
> >
> > if (trip >= tz->trips || (trip < 0 && trip !=
> > THERMAL_TRIPS_NONE)) --
> > 2.0.0.rc2
> >
>



--
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group


\
 
 \ /
  Last update: 2014-10-03 11:01    [W:0.290 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site