lkml.org 
[lkml]   [2014]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 07/13] ARM: shmobile: R-Mobile: Use generic_pm_domain.attach_dev() for pm_clk setup
On Fri, 26 Sep 2014, Geert Uytterhoeven wrote:
> On Thu, Sep 25, 2014 at 6:28 PM, Geert Uytterhoeven
> <geert+renesas@glider.be> wrote:
> > diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
> > index 717e6413d29cb998..ae846dfcd69293f7 100644
> > --- a/arch/arm/mach-shmobile/pm-rmobile.c
> > +++ b/arch/arm/mach-shmobile/pm-rmobile.c
> > @@ -101,6 +101,17 @@ static bool rmobile_pd_active_wakeup(struct device *dev)
> > return true;
> > }
> >
> > +static void rmobile_pd_attach_dev(struct device *dev)
> > +{
> > + if (pm_clk_no_clocks(dev))
> > + pm_clk_add(dev, NULL);
>
> With !CONFIG_PM_RUNTIME, this doesn't work well in the DT case,
> as the clocks are no longer enabled by runtime PM
> (some clocks may have been enabled by boot loader/reset state though).
>
> In the legacy case, this works more or less, as genpd takes over after
> the pm_clk domain has been initialized, which implies enabling the clocks
> if !CONFIG_PM_RUNTIME.
>
> Will fix...

The patch below fixes that.

I'll update the whole series, and will repost after v3.18-rc1, after the
prerequisites are in.

From cf40afcfab65fef8e6e6fa84bd3b49434afcb5eb Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 1 Oct 2014 20:05:53 +0200
Subject: [PATCH] ARM: shmobile: R-Mobile: Enable module clocks if !CONFIG_PM_RUNTIME

ARM: shmobile: R-Mobile: Enable module clocks if !CONFIG_PM_RUNTIME

If CONFIG_PM_RUNTIME is not set, the clocks must be enabled before the
devices can be used. Also add missing pm_clk_create()/pm_clk_destroy()
calls.

Currently these clocks are enabled by the !CONFIG_PM_RUNTIME version of
pm_clk_notify, activated by the hack in drivers/sh/pm_runtime.c, but
this will go away soon (at least for DT, cfr. "[PATCH] drivers: sh:
Disable PM runtime for multi-platform r8a7740 with genpd").

On detach, disabling the clocks is already handled by pm_clk_destroy().
On system suspend/resume, disabling/enabling clocks is already handled
from the genpd->dev_ops.{start,stop}() callbacks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This depends on "PM / clock_ops: Fix crash in clocks management code if
!CONFIG_PM_RUNTIME".

arch/arm/mach-shmobile/pm-rmobile.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 80be5848adc8f15c..e5a2c568d96cdd6b 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -121,13 +121,23 @@ static bool rmobile_pd_active_wakeup(struct device *dev)

static void rmobile_pd_attach_dev(struct device *dev)
{
- if (pm_clk_no_clocks(dev))
- pm_clk_add(dev, NULL);
+ int error;
+
+ error = pm_clk_create(dev);
+ if (error) {
+ dev_err(dev, "pm_clk_create failed %d\n", error);
+ return;
+ }
+
+ pm_clk_add(dev, NULL);
+
+ if (!IS_ENABLED(CONFIG_PM_RUNTIME))
+ pm_clk_resume(dev);
}

static void rmobile_pd_detach_dev(struct device *dev)
{
- pm_clk_remove(dev, NULL);
+ pm_clk_destroy(dev);
}

static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
--
1.9.1
Gr{oetje,eeting}s,
Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds


\
 
 \ /
  Last update: 2014-10-03 18:41    [W:1.612 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site