lkml.org 
[lkml]   [2014]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[RFC PATCH 1/5] block, ioprio: include caching advice via ionice
From
Date
From: Dan Williams <dan.j.williams@intel.com>

Steal one unused bit from the priority class and two bits from the
priority data, to implement a 3 bit cache-advice field. Similar to the
page cache advice from fadvise() these hints are meant to be consumed
by hybrid drives. Solid State Hyrbid-Drives, as defined by the SATA-IO
Specification, implement up to a 4-bit cache priority that can be
specified along with a FPDMA command.

IOPRIO_ADV_NONE: default if ionice hint is not provided

IOPRIO_ADV_EVICT: indicate that if the lba's associated with
this command are in the cache, write them back
and invalidate.
IOPRIO_ADV_DONTNEED: caching this data has little value, but no
need to actively evict

IOPRIO_ADV_NORMAL: perform best-effort / device-default caching

IOPRIO_ADV_RESERVED1: reserved for future use, potentially
IOPRIO_ADV_RESERVED2: permit the kernel to use these for
IOPRIO_ADV_RESERVED3: internal cache priorities, but userspace
owns highest priority override

IOPRIO_ADV_WILLNEED: cache this data at the highest possible priority

The expectation is that a table in the driver is responsible for
translating this advice into transport/device specific priority value.

Signed-off-by: Kapil Karkra <kapil.karkra@intel.com>
Signed-off-by: Jason B. Akers <jason.b.akers@intel.com>
---
include/linux/ioprio.h | 32 ++++++++++++++++++++++++++++----
1 file changed, 28 insertions(+), 4 deletions(-)

diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h
index beb9ce1..752813d 100644
--- a/include/linux/ioprio.h
+++ b/include/linux/ioprio.h
@@ -5,17 +5,27 @@
#include <linux/iocontext.h>

/*
- * Gives us 8 prio classes with 13-bits of data for each class
+ * Gives us 4 prio classes with 11-bits of data for each class
+ * ...additionally a prio can indicate one of 7 cacheability hints
*/
#define IOPRIO_BITS (16)
+#define IOPRIO_CACHE_SHIFT (15) /* msb of the cache-advice mask */
#define IOPRIO_CLASS_SHIFT (13)
-#define IOPRIO_PRIO_MASK ((1UL << IOPRIO_CLASS_SHIFT) - 1)
+#define IOPRIO_ADV_SHIFT (11)
+#define IOPRIO_PRIO_MASK ((1UL << IOPRIO_ADV_SHIFT) - 1)

-#define IOPRIO_PRIO_CLASS(mask) ((mask) >> IOPRIO_CLASS_SHIFT)
+#define IOPRIO_PRIO_CLASS(mask) (((mask) >> IOPRIO_CLASS_SHIFT) & 3)
#define IOPRIO_PRIO_DATA(mask) ((mask) & IOPRIO_PRIO_MASK)
+#define IOPRIO_ADVICE(mask) ((((mask) >> IOPRIO_ADV_SHIFT) & 3) | \
+ (((mask) >> IOPRIO_CACHE_SHIFT & 1) << 2))
#define IOPRIO_PRIO_VALUE(class, data) (((class) << IOPRIO_CLASS_SHIFT) | data)
+#define IOPRIO_ADVISE(class, data, advice) \
+ ((IOPRIO_PRIO_VALUE(class, data) | ((advice) & 3) << IOPRIO_ADV_SHIFT)\
+ | (((advice) & 4) << (IOPRIO_CACHE_SHIFT - 2)))

-#define ioprio_valid(mask) (IOPRIO_PRIO_CLASS((mask)) != IOPRIO_CLASS_NONE)
+#define ioprio_valid(mask) (IOPRIO_PRIO_CLASS((mask)) != \
+ IOPRIO_CLASS_NONE)
+#define ioprio_advice_valid(mask) (IOPRIO_ADVICE(mask) != IOPRIO_ADV_NONE)

/*
* These are the io priority groups as implemented by CFQ. RT is the realtime
@@ -31,6 +41,20 @@ enum {
};

/*
+ * Four cacheability hints that map to their fadvise(2) equivalents
+ */
+enum {
+ IOPRIO_ADV_NONE,
+ IOPRIO_ADV_EVICT, /* actively discard cached data */
+ IOPRIO_ADV_DONTNEED, /* caching this data has little value */
+ IOPRIO_ADV_NORMAL, /* best-effort / device-default cache priority */
+ IOPRIO_ADV_RESERVED1, /* reserved for future use */
+ IOPRIO_ADV_RESERVED2,
+ IOPRIO_ADV_RESERVED3,
+ IOPRIO_ADV_WILLNEED, /* high temporal locality or cache valuable */
+};
+
+/*
* 8 best effort priority levels are supported
*/
#define IOPRIO_BE_NR (8)


\
 
 \ /
  Last update: 2014-10-29 20:21    [W:0.195 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site