lkml.org 
[lkml]   [2014]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 3.17 087/146] ARM: dts: imx28-evk: Let i2c0 run at 100kHz
    Date
    3.17-stable review patch.  If anyone has any objections, please let me know.

    ------------------

    From: Fabio Estevam <fabio.estevam@freescale.com>

    commit d1e61eb443dc7512885dfe89ee2f2a1c29fcb1da upstream.

    Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues
    when doing the following sequence in loop:

    - Boot the kernel
    - Perform audio playback
    - Reboot the system via 'reboot' command

    In many times the audio card cannot be probed, which causes playback to fail.

    After restoring to the original i2c0 frequency of 100kHz there is no such
    problem anymore.

    This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88.

    Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
    Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

    ---
    arch/arm/boot/dts/imx28-evk.dts | 1 -
    1 file changed, 1 deletion(-)

    --- a/arch/arm/boot/dts/imx28-evk.dts
    +++ b/arch/arm/boot/dts/imx28-evk.dts
    @@ -193,7 +193,6 @@
    i2c0: i2c@80058000 {
    pinctrl-names = "default";
    pinctrl-0 = <&i2c0_pins_a>;
    - clock-frequency = <400000>;
    status = "okay";

    sgtl5000: codec@0a {



    \
     
     \ /
      Last update: 2014-10-28 09:21    [W:4.238 / U:0.084 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site