Messages in this thread | | | Date | Tue, 21 Oct 2014 07:54:20 +0200 | From | Michal Simek <> | Subject | Re: [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information |
| |
On 10/16/2014 07:11 PM, Soren Brinkmann wrote: > Add pinctrl descriptions to the zc702 and zc706 device trees. > > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> > --- > arch/arm/boot/dts/zynq-7000.dtsi | 8 ++- > arch/arm/boot/dts/zynq-zc702.dts | 147 +++++++++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/zynq-zc706.dts | 126 +++++++++++++++++++++++++++++++++ > 3 files changed, 280 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi > index 24036c440440..37d7fe36a129 100644 > --- a/arch/arm/boot/dts/zynq-7000.dtsi > +++ b/arch/arm/boot/dts/zynq-7000.dtsi > @@ -238,7 +238,7 @@ > slcr: slcr@f8000000 { > #address-cells = <1>; > #size-cells = <1>; > - compatible = "xlnx,zynq-slcr", "syscon"; > + compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
I expect that you have this here to be able to probe the driver. slcr is not the bus. You should be able just to probe child nodes.
Thanks, Michal
| |