lkml.org 
[lkml]   [2014]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/3] i2c/at91: add support for system PM
Date
Hi Kevin,

> -----Original Message-----
> From: Kevin Hilman [mailto:khilman@kernel.org]
> Sent: Tuesday, October 21, 2014 2:16 AM
> To: Yang, Wenyou
> Cc: wsa@the-dreams.de; Desroches, Ludovic; linux-i2c@vger.kernel.org; linux-
> kernel@vger.kernel.org; Ferre, Nicolas; linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH 2/3] i2c/at91: add support for system PM
>
> Wenyou Yang <wenyou.yang@atmel.com> writes:
>
> Add a changelog here describing what you're doing, and why.
>
> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > ---
> > drivers/i2c/busses/i2c-at91.c | 30 ++++++++++++++++++++++++++++++
> > 1 file changed, 30 insertions(+)
> >
> > diff --git a/drivers/i2c/busses/i2c-at91.c
> > b/drivers/i2c/busses/i2c-at91.c index 03b9f48..8f408f8 100644
> > --- a/drivers/i2c/busses/i2c-at91.c
> > +++ b/drivers/i2c/busses/i2c-at91.c
> > @@ -845,6 +845,35 @@ static int at91_twi_remove(struct platform_device
> > *pdev) }
> >
> > #ifdef CONFIG_PM
> > +#ifdef CONFIG_PM_SLEEP
> > +static int at91_twi_suspend(struct device *dev) {
> > + struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
> > +
> > + if (!pm_runtime_suspended(dev))
> > + clk_disable_unprepare(twi_dev->clk);
>
> I would just call at91_twi_runtime_suspend() here.
>
> Then, if you need to add additional steps, you only have to add them in once
> place. This also makes it obvious that ->suspend and
> ->runtime_suspend are doing the exact same thing.
>
> NOTE: you'll need to wrap the runtime_suspend|resume functions in just
> CONFIG_PM instead of CONFIG_PM_RUNTIME for this to work.
Thanks a lot, I will modify it.

>
> Kevin

Best Regards,
Wenyou Yang


\
 
 \ /
  Last update: 2014-10-21 03:41    [W:0.315 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site