lkml.org 
[lkml]   [2014]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: dmar messages caused by graphics.
Adding David and Jiang, they might have an idea whats going wrong.

On Fri, Oct 17, 2014 at 05:17:16PM -0400, Dave Jones wrote:
> Just hit this while fuzz-testing, (curiously, no graphics
> related stuff was happening, X isn't even loaded on that box).
>
> dmar: DRHD: handling fault status reg 2
> dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 7ffffff000
> DMAR:[fault reason 05] PTE Write access is not set
>
>
> 00:02:0 is..
>
> 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th
> Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00
> [VGA controller])
>
> 00: 86 80 12 04 07 04 90 00 06 00 00 03 00 00 00 00
> 10: 04 00 00 c0 00 00 00 00 0c 00 00 b0 00 00 00 00
> 20: 01 30 00 00 00 00 00 00 00 00 00 00 86 80 12 22
> 30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00
>
>
> So then I rebooted, and noticed it spewed the exact same message on boot up too.
>
> I power cycled, and this time got
>
> [ 0.576231] dmar: Host address width 39
> [ 0.576336] dmar: DRHD base: 0x000000fed90000 flags: 0x0
> [ 0.576491] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
> [ 0.576659] dmar: DRHD base: 0x000000fed91000 flags: 0x1
> [ 0.576793] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
> [ 0.576961] dmar: RMRR base: 0x000000a2a1f000 end: 0x000000a2a32fff
> [ 0.577075] dmar: RMRR base: 0x000000ad800000 end: 0x000000af9fffff
> [ 6.715745] DMAR: No ATSR found
> [ 8.081845] [drm] DMAR active, disabling use of stolen memory
> [ 9.927343] dmar: DRHD: handling fault status reg 2
> [ 9.928335] dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 3c11284000
> DMAR:[fault reason 05] PTE Write access is not set
> [ 11.916211] dmar: DRHD: handling fault status reg 2
> [ 11.917105] dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 3c11284000
> DMAR:[fault reason 05] PTE Write access is not set
>
>
> Same thing, different fault address. It seems to change every time I boot.
>
>
> Looking in the logs, this started happening on the 15th. The first instance
> was this during boot..
>
> [ 9.917240] dmar: DRHD: handling fault status reg 2
> [ 9.918150] dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 7300000000
> [ 9.918150] DMAR:[fault reason 05] PTE Write access is not set
> [ 9.919582] dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 7ffffff000
> [ 9.919582] DMAR:[fault reason 05] PTE Write access is not set
> [ 10.157240] dmar: DRHD: handling fault status reg 3
> [ 10.158017] dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 3579736000
> [ 10.158017] DMAR:[fault reason 05] PTE Write access is not set
> [ 11.926114] dmar: DRHD: handling fault status reg 3
> [ 11.927117] dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 7300000000
> [ 11.927117] DMAR:[fault reason 05] PTE Write access is not set
>
> That time, the 'reg 3' showed up.
>
> Dying hardware ? Or bug ?
>
> Dave
>


\
 
 \ /
  Last update: 2014-10-20 12:21    [W:0.044 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site