lkml.org 
[lkml]   [2014]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] pinctrl: baytrail: show output gpio state correctly on Intel Baytrail
Date
Even if a gpio pin is set to output, we still need to set INPUT_EN
functionality (by clearing INPUT_EN bit) to be able to read the pin's
level.

E.g. without this change, we'll always read low level state from sysfs.

Cc: <stable@vger.kernel.org> # v3.14+
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---

v1 to v2: improved patch's body description as requested by Felipe Balbi
---

drivers/pinctrl/pinctrl-baytrail.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-baytrail.c b/drivers/pinctrl/pinctrl-baytrail.c
index e12e5b07f6d7..c23d8ded936d 100644
--- a/drivers/pinctrl/pinctrl-baytrail.c
+++ b/drivers/pinctrl/pinctrl-baytrail.c
@@ -318,7 +318,7 @@ static int byt_gpio_direction_output(struct gpio_chip *chip,
"Potential Error: Setting GPIO with direct_irq_en to output");

reg_val = readl(reg) | BYT_DIR_MASK;
- reg_val &= ~BYT_OUTPUT_EN;
+ reg_val &= ~(BYT_OUTPUT_EN | BYT_INPUT_EN);

if (value)
writel(reg_val | BYT_LEVEL, reg);
--
2.1.0


\
 
 \ /
  Last update: 2014-10-14 20:21    [W:0.272 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site