lkml.org 
[lkml]   [2014]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 24/28] drm/i2c: tda998x: adjust the audio CTS to the mode clock
On Thu, Jan 09, 2014 at 12:07:02PM +0100, Jean-Francois Moine wrote:
>
> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
> ---
> drivers/gpu/drm/i2c/tda998x_drv.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 68630b8..c2163f4 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -723,7 +723,7 @@ tda998x_configure_audio(struct tda998x_priv *priv,
> struct drm_display_mode *mode)
> {
> uint8_t buf[6], clksel_aip, clksel_fs, cts_n, adiv;
> - uint32_t n;
> + uint32_t n, cts;
>
> /* Enable audio ports */
> reg_write(priv, REG_ENA_AP, priv->audio_port);
> @@ -777,9 +777,10 @@ tda998x_configure_audio(struct tda998x_priv *priv,
> n = 128 * AUDIO_SAMPLE; /* acr_n = 128 * sample_rate / 1000 */
>
> /* Write the CTS and N values */
> - buf[0] = 0x44;
> - buf[1] = 0x42;
> - buf[2] = 0x01;
> + cts = mode->clock;
> + buf[0] = cts;
> + buf[1] = cts >> 8;
> + buf[2] = cts >> 16;

NAK. We use auto-CTS mode, so the actual programmed CTS value is
entirely irrelevant.

--
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".


\
 
 \ /
  Last update: 2014-01-09 14:21    [W:0.047 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site