lkml.org 
[lkml]   [2014]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectBroken locking in leds-lp5523.c
Hi!

There's some locking weirdness, and few missing comments in lp5523
driver.

Now, this is untested patch from my reverse-engineering. I hope I
understood things right...

In particular, there's unbalanced unlock in
lp5523_update_program_memory, and lp5523_update_program_memory needs
to be protected by the lock.

Comments? Does someone maintain this?

Thanks,
Pavel
Signed-off-by: Pavel Machek <pavel@ucw.cz>


diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index c00f55e4..e8b83e9 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -34,7 +34,15 @@

#include "leds-lp55xx-common.h"

-#define LP5523_PROGRAM_LENGTH 32
+#define LP5523_PROGRAM_LENGTH 32 /* bytes */
+/* Memory is used like this:
+ 0x00 engine 1 program
+ 0x10 engine 2 program
+ 0x20 engine 3 program
+ 0x30 engine 1 muxing info
+ 0x40 engine 2 muxing info
+ 0x50 engine 3 muxing info
+ ...and offsets are hard-coded all around :-( */
#define LP5523_MAX_LEDS 9

/* Registers */
@@ -265,20 +273,25 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)
/* one pattern per engine setting LED MUX start and stop addresses */
static const u8 pattern[][LP5523_PROGRAM_LENGTH] = {
{ 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ /* 9c30 -- mux_map_start(0x30)
+ 9cb0 -- mux_ld_end(0x50)
+ 9d80 -- mux_sel???(0x00)
+ d800 -- invalid?? */
{ 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
};

- /* hardcode 32 bytes of memory for each engine from program memory */
+ /* hardcode LP5523_PROGRAM_LENGTH bytes of memory for each
+ engine from program memory */
ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00);
if (ret)
return ret;

- ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10);
+ ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, LP5523_PROGRAM_LENGTH / 2);
if (ret)
return ret;

- ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20);
+ ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, LP5523_PROGRAM_LENGTH);
if (ret)
return ret;

@@ -346,10 +359,8 @@ static int lp5523_update_program_memory(struct lp55xx_chip *chip,

for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) {
ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
- if (ret) {
- mutex_unlock(&chip->lock);
+ if (ret)
return -EINVAL;
- }
}

return size;
@@ -551,15 +562,17 @@ static ssize_t store_engine_load(struct device *dev,
{
struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
struct lp55xx_chip *chip = led->chip;
+ ssize_t res;

mutex_lock(&chip->lock);

chip->engine_idx = nr;
lp5523_load_engine_and_select_page(chip);

+ res = lp5523_update_program_memory(chip, buf, len);
mutex_unlock(&chip->lock);

- return lp5523_update_program_memory(chip, buf, len);
+ return res;
}
store_load(1)
store_load(2)
diff --git a/drivers/leds/leds-lp8501.c b/drivers/leds/leds-lp8501.c
index 8d55a780..ae5c6fe 100644
--- a/drivers/leds/leds-lp8501.c
+++ b/drivers/leds/leds-lp8501.c
@@ -262,7 +262,7 @@ static void lp8501_firmware_loaded(struct lp55xx_chip *chip)
}

/*
- * Program momery sequence
+ * Program memory sequence
* 1) set engine mode to "LOAD"
* 2) write firmware data into program memory
*/
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2014-01-07 22:01    [W:0.145 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site