lkml.org 
[lkml]   [2014]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] IIO pulse capture support for TI ECAP
Date
This series adds support for PWM capture devices within IIO and
adds a TI ECAP IIO driver.

PWM capture devices are supported using a new IIO "pulse" channel type.

The IIO ECAP driver implements interrupt driven triggered buffer capture
only as raw sample reads are not applicable to this hardware.
Initially, the driver supports a single pulse width measurement with
configurable polarity. The ECAP hardware can support measurement of a
complete period and duty cycle but this is not yet implemented.

Matt Porter (5):
iio: add support for pulse width capture devices
iio: pulse: add TI ECAP driver
iio: enable selection and build of pulse drivers
pwm: enable TI PWMSS if the IIO tiecap driver is selected
ARM: dts: AM33XX: Add ecap interrupt properties

arch/arm/boot/dts/am33xx.dtsi | 6 +
drivers/iio/Kconfig | 1 +
drivers/iio/Makefile | 1 +
drivers/iio/industrialio-core.c | 1 +
drivers/iio/pulse/Kconfig | 20 ++
drivers/iio/pulse/Makefile | 6 +
drivers/iio/pulse/tiecap.c | 493 ++++++++++++++++++++++++++++++++++++++++
drivers/pwm/Kconfig | 2 +-
include/linux/iio/types.h | 1 +
9 files changed, 530 insertions(+), 1 deletion(-)
create mode 100644 drivers/iio/pulse/Kconfig
create mode 100644 drivers/iio/pulse/Makefile
create mode 100644 drivers/iio/pulse/tiecap.c

--
1.8.4



\
 
 \ /
  Last update: 2014-01-29 22:41    [W:0.094 / U:3.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site