Messages in this thread Patch in this message | | | From | Boris BREZILLON <> | Subject | [RFC PATCH v2 07/14] of: mtd: add documentation for the ONFI NAND timing mode property | Date | Wed, 29 Jan 2014 15:34:17 +0100 |
| |
Add documentation for the ONFI NAND timing mode property.
Signed-off-by: Boris BREZILLON <b.brezillon.dev@gmail.com> --- Documentation/devicetree/bindings/mtd/nand.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt index 0c962296..75e46f3 100644 --- a/Documentation/devicetree/bindings/mtd/nand.txt +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -8,3 +8,8 @@ E.g. : nand-ecc-level = <4 512>; /* 4 bits / 512 bytes */ - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false +- onfi,nand-timing-mode: an integer encoding the ONFI timing mode of the NAND + chip. This is only used when the chip does not support the ONFI standard. + Choose the closest mode fulfilling the NAND chip timings. + For a full description of the different timing modes see this document: + www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |