lkml.org 
[lkml]   [2014]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFCv2,2/2] i2c: add new dual Flash driver,LM3646
On 01/28/2014 07:55 AM, Daniel Jeong wrote:
> Add new dual flash driver.
> LM3646 is a dual Flash LED Driver, LED1 and LED2, following the datasheet.
> But there is no registers to contorl LED2 brightness.
> LED2 brightness can be controlled by limiting max brightness.
> LED2 brightness = Total brightness - LED1 brightness
> LED2 will be off if LED2 brightness is set equal to or bigger than Total brightness.
> And the brightness step is very small, 1.46mA for Torch, 11.71mA for Flash.
> If the step is changed to mA, maximum brightness cannot be reachable.
>
> Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com>
> ---
> drivers/media/i2c/Kconfig | 9 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/lm3646.c | 400 ++++++++++++++++++++++++++++++++++++++++++++
> include/media/lm3646.h | 87 ++++++++++
> 4 files changed, 497 insertions(+)
> create mode 100644 drivers/media/i2c/lm3646.c
> create mode 100644 include/media/lm3646.h
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 842654d..654df46 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -630,6 +630,15 @@ config VIDEO_LM3560
> This is a driver for the lm3560 dual flash controllers. It controls
> flash, torch LEDs.
>
> +config VIDEO_LM3646
> + tristate "LM3646 dual flash driver support"
> + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
> + depends on MEDIA_CAMERA_SUPPORT
> + select REGMAP_I2C
> + ---help---
> + This is a driver for the lm3646 dual flash controllers. It controls
> + flash, torch LEDs.
> +
> comment "Video improvement chips"
>
> config VIDEO_UPD64031A
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index e03f177..a52cda6 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/
> obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
> obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o
> obj-$(CONFIG_VIDEO_LM3560) += lm3560.o
> +obj-$(CONFIG_VIDEO_LM3646) += lm3646.o
> obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o
> obj-$(CONFIG_VIDEO_AK881X) += ak881x.o
> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
> diff --git a/drivers/media/i2c/lm3646.c b/drivers/media/i2c/lm3646.c
> new file mode 100644
> index 0000000..4b025f2
> --- /dev/null
> +++ b/drivers/media/i2c/lm3646.c
> @@ -0,0 +1,400 @@
> +/*
> + * drivers/media/i2c/lm3646.c
> + * General device driver for TI lm3646, Dual FLASH LED Driver
> + *
> + * Copyright (C) 2014 Texas Instruments
> + *
> + * Contact: Daniel Jeong <gshark.jeong@gmail.com>
> + * Ldd-Mlp <ldd-mlp@list.ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/slab.h>
> +#include <linux/regmap.h>
> +#include <linux/videodev2.h>
> +#include <media/lm3646.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +
> +/* registers definitions */
> +#define REG_ENABLE 0x01
> +#define REG_TORCH_BR 0x05
> +#define REG_FLASH_BR 0x05
> +#define REG_FLASH_TOUT 0x04
> +#define REG_FLAG 0x08
> +#define REG_STROBE_SRC 0x06
> +#define REG_LED1_FLASH_BR 0x06
> +#define REG_LED1_TORCH_BR 0x07
> +
> +#define MASK_ENABLE 0x03
> +#define MASK_TORCH_BR 0x70
> +#define MASK_FLASH_BR 0x0F
> +#define MASK_FLASH_TOUT 0x07
> +#define MASK_FLAG 0xFF
> +#define MASK_STROBE_SRC 0x80
> +
> +/* Fault Mask */
> +#define FAULT_TIMEOUT (1<<0)
> +#define FAULT_SHORT_CIRCUIT (1<<1)
> +#define FAULT_UVLO (1<<2)
> +#define FAULT_IVFM (1<<3)
> +#define FAULT_OCP (1<<4)
> +#define FAULT_OVERTEMP (1<<5)
> +#define FAULT_NTC_TRIP (1<<6)
> +#define FAULT_OVP (1<<7)
> +
> +enum led_mode {
> + MODE_SHDN = 0x0,
> + MODE_TORCH = 0x2,
> + MODE_FLASH = 0x3,
> +};
> +
> +/*
> + * struct lm3646_flash
> + *
> + * @pdata: platform data
> + * @regmap: reg. map for i2c
> + * @lock: muxtex for serial access.
> + * @led_mode: V4L2 LED mode
> + * @ctrls_led: V4L2 contols
> + * @subdev_led: V4L2 subdev
> + */
> +struct lm3646_flash {
> + struct device *dev;
> + struct lm3646_platform_data *pdata;
> + struct regmap *regmap;
> +
> + enum v4l2_flash_led_mode led_mode;
> + struct v4l2_ctrl_handler ctrls_led;
> + struct v4l2_subdev subdev_led;
> +};
> +
> +#define to_lm3646_flash(_ctrl) \
> + container_of(_ctrl->handler, struct lm3646_flash, ctrls_led)
> +
> +/* enable mode control */
> +static int lm3646_mode_ctrl(struct lm3646_flash *flash)
> +{
> + int rval = -EINVAL;
> +
> + switch (flash->led_mode) {
> + case V4L2_FLASH_LED_MODE_NONE:
> + rval = regmap_update_bits(flash->regmap,
> + REG_ENABLE, MASK_ENABLE, MODE_SHDN);
> + break;
> + case V4L2_FLASH_LED_MODE_TORCH:
> + rval = regmap_update_bits(flash->regmap,
> + REG_ENABLE, MASK_ENABLE, MODE_TORCH);
> + break;
> + case V4L2_FLASH_LED_MODE_FLASH:
> + rval = regmap_update_bits(flash->regmap,
> + REG_ENABLE, MASK_ENABLE, MODE_FLASH);
> + break;
> + }
> + return rval;
> +}
> +
> +/* V4L2 controls */
> +static int lm3646_get_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct lm3646_flash *flash = to_lm3646_flash(ctrl);
> + int rval = -EINVAL;
> +
> + if (ctrl->id == V4L2_CID_FLASH_FAULT) {
> + s32 fault = 0;
> + unsigned int reg_val;
> + rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
> + if (rval < 0)
> + return rval;
> +
> + if (reg_val & FAULT_TIMEOUT)
> + fault |= V4L2_FLASH_FAULT_TIMEOUT;
> + if (reg_val & FAULT_SHORT_CIRCUIT)
> + fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
> + if (reg_val & FAULT_UVLO)
> + fault |= V4L2_FLASH_FAULT_UVLO;
> + if (reg_val & FAULT_IVFM)
> + fault |= V4L2_FLASH_FAULT_IVFM;
> + if (reg_val & FAULT_OCP)
> + fault |= V4L2_FLASH_FAULT_OVER_CURRENT;
> + if (reg_val & FAULT_OVERTEMP)
> + fault |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
> + if (reg_val & FAULT_NTC_TRIP)
> + fault |= V4L2_FLASH_FAULT_NTC_TRIP;
> + if (reg_val & FAULT_OVP)
> + fault |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
> +
> + ctrl->cur.val = fault;

That should be ctrl->val = fault. At one time it was indeed cur.val, but that
has been changed a few years ago.

> + }
> +
> + return rval;
> +}
> +
> +static int lm3646_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct lm3646_flash *flash = to_lm3646_flash(ctrl);
> + u8 bval;
> + int rval = -EINVAL;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_FLASH_LED_MODE:
> + flash->led_mode = ctrl->val;
> + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
> + rval = lm3646_mode_ctrl(flash);
> + break;
> +
> + case V4L2_CID_FLASH_STROBE_SOURCE:
> + rval = regmap_update_bits(flash->regmap,
> + REG_STROBE_SRC, MASK_STROBE_SRC,
> + (ctrl->val) << 7);
> + break;
> +
> + case V4L2_CID_FLASH_STROBE:
> + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
> + return rval;
> + rval = lm3646_mode_ctrl(flash);
> + break;
> +
> + case V4L2_CID_FLASH_STROBE_STOP:
> + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
> + return rval;
> + flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
> + rval = lm3646_mode_ctrl(flash);
> + break;
> +
> + case V4L2_CID_FLASH_TIMEOUT:
> + bval = LM3646_FLASH_TOUT_ms_TO_REG(ctrl->val);
> + rval = regmap_update_bits(flash->regmap,
> + REG_FLASH_TOUT, MASK_FLASH_TOUT,
> + bval);
> + break;
> +
> + case V4L2_CID_FLASH_INTENSITY:
> + bval = LM3646_TOTAL_FLASH_BRT_uA_TO_REG(ctrl->val);
> + rval = regmap_update_bits(flash->regmap,
> + REG_FLASH_BR, MASK_FLASH_BR, bval);
> + break;
> +
> + case V4L2_CID_FLASH_TORCH_INTENSITY:
> + bval = LM3646_TOTAL_TORCH_BRT_uA_TO_REG(ctrl->val);
> + rval = regmap_update_bits(flash->regmap,
> + REG_TORCH_BR, MASK_TORCH_BR,
> + bval << 4);
> + break;
> + }
> +
> + return rval;
> +}
> +
> +static const struct v4l2_ctrl_ops lm3646_led_ctrl_ops = {
> + .g_volatile_ctrl = lm3646_get_ctrl,
> + .s_ctrl = lm3646_set_ctrl,
> +};
> +
> +static int lm3646_init_controls(struct lm3646_flash *flash)
> +{
> + struct v4l2_ctrl *fault;
> + struct v4l2_ctrl_handler *hdl = &flash->ctrls_led;
> + const struct v4l2_ctrl_ops *ops = &lm3646_led_ctrl_ops;
> +
> + v4l2_ctrl_handler_init(hdl, 8);
> + /* flash mode */
> + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE,
> + V4L2_FLASH_LED_MODE_TORCH, ~0x7,
> + V4L2_FLASH_LED_MODE_NONE);
> + flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
> +
> + /* flash source */
> + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE,
> + 0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
> +
> + /* flash strobe */
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
> + /* flash strobe stop */
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
> +
> + /* flash strobe timeout */
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT,
> + LM3646_FLASH_TOUT_MIN,
> + LM3646_FLASH_TOUT_MAX,
> + LM3646_FLASH_TOUT_STEP, flash->pdata->flash_timeout);
> +
> + /* max flash current */
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY,
> + LM3646_TOTAL_FLASH_BRT_MIN,
> + LM3646_TOTAL_FLASH_BRT_MAX,
> + LM3646_TOTAL_FLASH_BRT_STEP,
> + LM3646_TOTAL_FLASH_BRT_MAX);
> +
> + /* max torch current */
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY,
> + LM3646_TOTAL_TORCH_BRT_MIN,
> + LM3646_TOTAL_TORCH_BRT_MAX,
> + LM3646_TOTAL_TORCH_BRT_STEP,
> + LM3646_TOTAL_TORCH_BRT_MAX);
> +
> + /* fault */
> + fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0,
> + V4L2_FLASH_FAULT_OVER_VOLTAGE
> + | V4L2_FLASH_FAULT_OVER_TEMPERATURE
> + | V4L2_FLASH_FAULT_SHORT_CIRCUIT
> + | V4L2_FLASH_FAULT_TIMEOUT, 0, 0);
> + if (fault != NULL)
> + fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
> +
> + if (hdl->error)
> + return hdl->error;
> +
> + flash->subdev_led.ctrl_handler = hdl;
> + return 0;
> +}
> +
> +/* initialize device */
> +static const struct v4l2_subdev_ops lm3646_ops = {
> + .core = NULL,
> +};
> +
> +static const struct regmap_config lm3646_regmap = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0xFF,
> +};
> +
> +static int lm3646_subdev_init(struct lm3646_flash *flash)
> +{
> + struct i2c_client *client = to_i2c_client(flash->dev);
> + int rval;
> +
> + v4l2_i2c_subdev_init(&flash->subdev_led, client, &lm3646_ops);
> + flash->subdev_led.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + strcpy(flash->subdev_led.name, LM3646_NAME);
> + rval = lm3646_init_controls(flash);
> + if (rval)
> + goto err_out;
> + rval = media_entity_init(&flash->subdev_led.entity, 0, NULL, 0);
> + if (rval < 0)
> + goto err_out;
> + flash->subdev_led.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
> + return rval;
> +
> +err_out:
> + v4l2_ctrl_handler_free(&flash->ctrls_led);
> + return rval;
> +}
> +
> +static int lm3646_init_device(struct lm3646_flash *flash)
> +{
> + unsigned int reg_val;
> + int rval;
> +
> + /* output disable */
> + flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
> + rval = lm3646_mode_ctrl(flash);
> + if (rval < 0)
> + return rval;
> + /*
> + * LED1 flash current setting
> + * LED2 flash current = Total(Max) flash current - LED1 flash current
> + */
> + rval = regmap_update_bits(flash->regmap, REG_LED1_FLASH_BR, 0x7F,
> + LM3646_LED1_FLASH_BRT_uA_TO_REG(flash->pdata->
> + led1_flash_brt));
> + if (rval < 0)
> + return rval;
> +
> + /*
> + * LED1 torch current setting
> + * LED2 torch current = Total(Max) torch current - LED1 torch current
> + */
> + rval = regmap_update_bits(flash->regmap, REG_LED1_TORCH_BR, 0x7F,
> + LM3646_LED1_TORCH_BRT_uA_TO_REG(flash->pdata->
> + led1_torch_brt));
> + if (rval < 0)
> + return rval;
> +
> + /* Reset flag register */
> + rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
> + return rval;
> +}
> +
> +static int lm3646_probe(struct i2c_client *client,
> + const struct i2c_device_id *devid)
> +{
> + struct lm3646_flash *flash;
> + struct lm3646_platform_data *pdata = dev_get_platdata(&client->dev);
> + int rval;
> +
> + flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
> + if (flash == NULL)
> + return -ENOMEM;
> +
> + flash->regmap = devm_regmap_init_i2c(client, &lm3646_regmap);
> + if (IS_ERR(flash->regmap))
> + return PTR_ERR(flash->regmap);
> +
> + /* if there is no platform data, use default values */
> + if (pdata == NULL) {
> + pdata = devm_kzalloc(&client->dev,
> + sizeof(struct lm3646_platform_data),
> + GFP_KERNEL);
> + if (pdata == NULL)
> + return -ENODEV;
> + pdata->flash_timeout = LM3646_FLASH_TOUT_MAX;
> + pdata->led1_torch_brt = LM3646_LED1_TORCH_BRT_MAX;
> + pdata->led1_flash_brt = LM3646_LED1_FLASH_BRT_MAX;
> + }
> + flash->pdata = pdata;
> + flash->dev = &client->dev;
> +
> + rval = lm3646_subdev_init(flash);
> + if (rval < 0)
> + return rval;
> +
> + rval = lm3646_init_device(flash);
> + if (rval < 0)
> + return rval;
> +
> + i2c_set_clientdata(client, flash);
> +
> + return 0;
> +}
> +
> +static int lm3646_remove(struct i2c_client *client)
> +{
> + struct lm3646_flash *flash = i2c_get_clientdata(client);
> +
> + v4l2_device_unregister_subdev(&flash->subdev_led);
> + v4l2_ctrl_handler_free(&flash->ctrls_led);
> + media_entity_cleanup(&flash->subdev_led.entity);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id lm3646_id_table[] = {
> + {LM3646_NAME, 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, lm3646_id_table);
> +
> +static struct i2c_driver lm3646_i2c_driver = {
> + .driver = {
> + .name = LM3646_NAME,
> + },
> + .probe = lm3646_probe,
> + .remove = lm3646_remove,
> + .id_table = lm3646_id_table,
> +};
> +
> +module_i2c_driver(lm3646_i2c_driver);
> +
> +MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
> +MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
> +MODULE_DESCRIPTION("Texas Instruments LM3646 Dual Flash LED driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/media/lm3646.h b/include/media/lm3646.h
> new file mode 100644
> index 0000000..c6acf5a
> --- /dev/null
> +++ b/include/media/lm3646.h
> @@ -0,0 +1,87 @@
> +/*
> + * include/media/lm3646.h
> + *
> + * Copyright (C) 2014 Texas Instruments
> + *
> + * Contact: Daniel Jeong <gshark.jeong@gmail.com>
> + * Ldd-Mlp <ldd-mlp@list.ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + */
> +
> +#ifndef __LM3646_H__
> +#define __LM3646_H__
> +
> +#include <media/v4l2-subdev.h>
> +
> +#define LM3646_NAME "lm3646"
> +#define LM3646_I2C_ADDR_REV1 (0x67)
> +#define LM3646_I2C_ADDR_REV0 (0x63)
> +
> +/* TOTAL FLASH Brightness Max
> + * min 93350uA, step 93750uA, max 1499600uA
> + */
> +#define LM3646_TOTAL_FLASH_BRT_MIN 93350
> +#define LM3646_TOTAL_FLASH_BRT_STEP 93750
> +#define LM3646_TOTAL_FLASH_BRT_MAX 1499600
> +#define LM3646_TOTAL_FLASH_BRT_uA_TO_REG(a) \
> + ((a) < LM3646_TOTAL_FLASH_BRT_MIN ? 0 : \
> + ((((a) - LM3646_TOTAL_FLASH_BRT_MIN) / LM3646_TOTAL_FLASH_BRT_STEP)))
> +
> +/* TOTAL TORCH Brightness Max
> + * min 23040uA, step 23430uA, max 187100uA
> + */
> +#define LM3646_TOTAL_TORCH_BRT_MIN 23040
> +#define LM3646_TOTAL_TORCH_BRT_STEP 23430
> +#define LM3646_TOTAL_TORCH_BRT_MAX 187100
> +#define LM3646_TOTAL_TORCH_BRT_uA_TO_REG(a) \
> + ((a) < LM3646_TOTAL_TORCH_BRT_MIN ? 0 : \
> + ((((a) - LM3646_TOTAL_TORCH_BRT_MIN) / LM3646_TOTAL_TORCH_BRT_STEP)))
> +
> +/* LED1 FLASH Brightness
> + * min 23040uA, step 11718uA, max 1499600uA
> + */
> +#define LM3646_LED1_FLASH_BRT_MIN 23040
> +#define LM3646_LED1_FLASH_BRT_STEP 11718
> +#define LM3646_LED1_FLASH_BRT_MAX 1499600
> +#define LM3646_LED1_FLASH_BRT_uA_TO_REG(a) \
> + ((a) <= LM3646_LED1_FLASH_BRT_MIN ? 0 : \
> + ((((a) - LM3646_LED1_FLASH_BRT_MIN) / LM3646_LED1_FLASH_BRT_STEP))+1)
> +
> +/* LED1 TORCH Brightness
> + * min 2530uA, step 1460uA, max 187100uA
> + */
> +#define LM3646_LED1_TORCH_BRT_MIN 2530
> +#define LM3646_LED1_TORCH_BRT_STEP 1460
> +#define LM3646_LED1_TORCH_BRT_MAX 187100
> +#define LM3646_LED1_TORCH_BRT_uA_TO_REG(a) \
> + ((a) <= LM3646_LED1_TORCH_BRT_MIN ? 0 : \
> + ((((a) - LM3646_LED1_TORCH_BRT_MIN) / LM3646_LED1_TORCH_BRT_STEP))+1)
> +
> +/* FLASH TIMEOUT DURATION
> + * min 50ms, step 50ms, max 400ms
> + */
> +#define LM3646_FLASH_TOUT_MIN 50
> +#define LM3646_FLASH_TOUT_STEP 50
> +#define LM3646_FLASH_TOUT_MAX 400
> +#define LM3646_FLASH_TOUT_ms_TO_REG(a) \
> + ((a) <= LM3646_FLASH_TOUT_MIN ? 0 : \
> + (((a) - LM3646_FLASH_TOUT_MIN) / LM3646_FLASH_TOUT_STEP))
> +
> +/* struct lm3646_platform_data
> + *
> + * @flash_timeout: flash timeout
> + * @led1_flash_brt: led1 flash mode brightness, uA
> + * @led1_torch_brt: led1 torch mode brightness, uA
> + */
> +struct lm3646_platform_data {
> +
> + u32 flash_timeout;
> +
> + u32 led1_flash_brt;
> + u32 led1_torch_brt;
> +};
> +
> +#endif /* __LM3646_H__ */
>

Regards,

Hans


\
 
 \ /
  Last update: 2014-01-28 08:41    [W:0.128 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site