lkml.org 
[lkml]   [2014]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/4] Input: zforce - fix lines exceeding 80 columns
Date
On Monday, 27. January 2014 19:46:11 Luis Ortega wrote:
> Fixed lines exceeding 80 characters long wherever possible,
> as per the coding style.
>
> Signed-off-by: Luis Ortega <luiorpe1@upv.es>

checkpatch did not complain on the initial submission, so I guess it's more an
issue of taste. Nevertheless I don't have a preference for one way or the
other, so

Acked-by: Heiko Stuebner <heiko@sntech.de>


> ---
> drivers/input/touchscreen/zforce_ts.c | 19 ++++++++++++-------
> 1 file changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/input/touchscreen/zforce_ts.c
> b/drivers/input/touchscreen/zforce_ts.c index c145c1d..c1b6b82 100644
> --- a/drivers/input/touchscreen/zforce_ts.c
> +++ b/drivers/input/touchscreen/zforce_ts.c
> @@ -235,7 +235,8 @@ static int zforce_scan_frequency(struct zforce_ts *ts,
> u16 idle, u16 finger, (finger & 0xff), ((finger >> 8) & 0xff),
> (stylus & 0xff), ((stylus >> 8) & 0xff) };
>
> - dev_dbg(&client->dev, "set scan frequency to (idle: %d, finger: %d,
> stylus: %d)\n", + dev_dbg(&client->dev,
> + "set scan frequency to (idle: %d, finger: %d, stylus: %d)\n",
> idle, finger, stylus);
>
> return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
> @@ -332,7 +333,8 @@ static int zforce_touch_event(struct zforce_ts *ts, u8
> *payload)
>
> count = payload[0];
> if (count > ZFORCE_REPORT_POINTS) {
> - dev_warn(&client->dev, "too many coordinates %d, expected max %d\n",
> + dev_warn(&client->dev,
> + "too many coordinates %d, expected max %d\n",
> count, ZFORCE_REPORT_POINTS);
> count = ZFORCE_REPORT_POINTS;
> }
> @@ -494,8 +496,8 @@ static irqreturn_t zforce_irq_thread(int irq, void
> *dev_id) while (!gpio_get_value(pdata->gpio_int)) {
> ret = zforce_read_packet(ts, payload_buffer);
> if (ret < 0) {
> - dev_err(&client->dev, "could not read packet, ret: %d\n",
> - ret);
> + dev_err(&client->dev,
> + "could not read packet, ret: %d\n", ret);
> break;
> }
>
> @@ -539,7 +541,8 @@ static irqreturn_t zforce_irq_thread(int irq, void
> *dev_id) payload[RESPONSE_DATA + 4];
> ts->version_rev = (payload[RESPONSE_DATA + 7] << 8) |
> payload[RESPONSE_DATA + 6];
> - dev_dbg(&ts->client->dev, "Firmware Version %04x:%04x %04x:
%04x\n",
> + dev_dbg(&ts->client->dev,
> + "Firmware Version %04x:%04x %04x:%04x\n",
> ts->version_major, ts->version_minor,
> ts->version_build, ts->version_rev);
>
> @@ -552,7 +555,8 @@ static irqreturn_t zforce_irq_thread(int irq, void
> *dev_id) break;
>
> default:
> - dev_err(&ts->client->dev, "unrecognized response id: 0x%x\n",
> + dev_err(&ts->client->dev,
> + "unrecognized response id: 0x%x\n",
> payload[RESPONSE_ID]);
> break;
> }
> @@ -618,7 +622,8 @@ static int zforce_suspend(struct device *dev)
>
> enable_irq_wake(client->irq);
> } else if (input->users) {
> - dev_dbg(&client->dev, "suspend without being a wakeup source\n");
> + dev_dbg(&client->dev,
> + "suspend without being a wakeup source\n");
>
> ret = zforce_stop(ts);
> if (ret)



\
 
 \ /
  Last update: 2014-01-27 21:01    [W:0.617 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site